bernette bernette 44 FUNLOCK

Name: bernette 44 FUNLOCK
Brand: bernette
Author: SewingSpecs

Price

Not available

SewingSpecs does not sell and does not show shop prices: check the price where you buy.

Sheet on the bernette website →

Compare with another machine

Add to my setup

Data from official source

Sheet curated by SewingSpecs — We check every spec sheet against the manufacturer's own documentation: each value carries its source and the date we read it. Published Sept. 17, 2026 · Last updated Sept. 18, 2026 · Data verified Sept. 18, 2026

The 44 FUNLOCK is a compact serger for edging and finishing, from 2 to 4 threads, aimed at people starting out with overlocking: colour-coded markings trace the thread path through the needle and lower looper, and the knife is driven from below, so stitch width adjusts with one hand.

It has 15 stitches spanning 2/3/4-thread overlock, a rolled hem down to 1.5 mm and a super-stretch stitch for jersey; differential feed runs from 0.6 to 2.0, so it keeps stretch hems flat and can also build deliberate gathers. It sews at 1300 stitches per minute, and the built-in waste collector keeps the work surface clear.

It is an overlock serger: it does not do cover-stitch or straight finishing seams, and threading stays manual, with no air assist. Anyone who also wants cover-stitch on the same machine should look at bernette's AIRLOCK models.

01 · Verified data

Technical specifications

Weight 7.2 kg (15.9 lb)

Parameter	Value	Source
Weight	7.2 kg (15.9 lb)	manufacturer website
Maximum threads	4	Declared by the brand
Available stitches	15	Declared by the brand
Stitch types	2-thread overlock, 3-thread overlock, 4-thread overlock, Narrow 3-thread overlock, 2-thread rolled hem, 3-thread rolled hem, 2-thread flatlock, 3-thread flatlock, 3-thread stretch overlock, 2-thread wrapped edge	Declared by the brand
2-thread conversion	With accessory	Declared by the brand
Differential feed ratio (minimum)	0.6	Declared by the brand
Differential feed ratio (maximum)	2	Declared by the brand
Stitch length (minimum)	1 mm	Declared by the brand
Stitch length (maximum)	4 mm	Declared by the brand
Overlock width (minimum)	3 mm	Declared by the brand
Overlock width (maximum)	7 mm	Declared by the brand
Needle threader	Manual	Declared by the brand
Knife drive	Lower	Declared by the brand
Space to the right of the needle	87 mm	Declared by the brand
Presser foot lift	4.5 mm	Declared by the brand
Maximum speed	1300 spm	Declared by the brand
Waste collector	Yes	Declared by the brand

02 · Summary

Pros and cons

In favour

Differential feed from 0.6 to 2.0 stops stretch hems from waving and builds gathers when needed
The knife is driven from below: stitch width adjusts with one hand
Threading paths are colour-coded, useful for anyone using a serger for the first time
The built-in waste collector keeps the work surface clear while sewing