Baby Lock Acclaim vs bernette 44 FUNLOCK

Technical comparison · Overlockers and sergers

In brief

Both are 4-thread sergers, and the choice depends on what you sew most. The Baby Lock Acclaim cuts down on setup (air-threaded loopers, automatic tension), while the bernette 44 FUNLOCK has a wider range of finishes, including flatlock and rolled hem. Figures quoted are manufacturer-declared.

Parameter
Identity
Use tier F2 — Intermediate F2 — Intermediate
Price
Price ~2200–5000 € ~450–1000 €
Universal specs
Weight — 7.2 kg
Category specs
Maximum threads 4 4
Needles, maximum 2 —
Available stitches — 15
Stitch types 2-thread overlock, 3-thread overlock, 4-thread overlock, Wave stitch 2-thread overlock, 3-thread overlock, 4-thread overlock, Narrow 3-thread overlock, 2-thread rolled hem, 3-thread rolled hem, 2-thread flatlock, 3-thread flatlock, 3-thread stretch overlock, 2-thread wrapped edge
2-thread conversion Built-in With accessory
Differential feed ratio (minimum) — 0.6
Differential feed ratio (maximum) — 2
Stitch length (minimum) 0.75 mm 1 mm
Stitch length (maximum) 4 mm 4 mm
Overlock width (minimum) 1.5 mm 3 mm
Overlock width (maximum) 7.5 mm 7 mm
Looper threading Air (jet-air) —
Needle threader Built-in Manual
Knife drive — Lower
Tension system Automatic —
Space to the right of the needle — 87 mm
Presser foot lift 6 mm 4.5 mm
Adjustable presser foot pressure Yes —
Maximum speed 1500 spm 1300 spm
Waste collector — Yes

The differences that matter

  • Stitches: 15 on the bernette, including flatlock, 2- and 3-thread rolled hem and stretch overlock; the Acclaim has 2-, 3- and 4-thread overlock plus a wave stitch → rolled hems and flat seams only with the bernette.
  • Presser foot lift 6 mm against 4.5 mm → on the Acclaim more layers or padding fit under the foot without being squashed.
  • Overlock width from 1.5 mm on the Acclaim, from 3 mm on the bernette → finer edges on light fabric only with the Acclaim.
  • Air-threaded loopers and built-in needle threader on the Acclaim, manual needle threader on the bernette → thread changes take less time on the Acclaim.

Which one to choose

Choose Baby Lock Acclaim if…

Choose the Acclaim if your fabric changes from one project to the next, say a light jersey and then a padded cloth: the presser foot lifts higher, and a thread change is quick because the loopers (the two arms that carry the lower threads) are threaded by a jet of air and the needle threads itself. The trade-off is a shorter stitch list: 2-, 3- and 4-thread overlock plus a wave stitch, with no flatlock or rolled hem.

See the Baby Lock Acclaim sheet →

Choose bernette 44 FUNLOCK if…

Choose the bernette if finishing matters as much as seaming: 2- and 3-thread rolled hems for the edges of light fabrics, flatlock for flat seams, stretch overlock. Differential feed (it sets how much the fabric is pulled or held back under the foot, so knits don't ripple) runs from 0.6 to 2, and a bin catches the trimmings. You accept threading the needle by hand and a less narrow overlock.

See the bernette 44 FUNLOCK sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.