bernette 44 FUNLOCK vs Janome MyLock 644D

Technical comparison · Overlockers and sergers

In brief

Two four-thread overlockers that split on two measures: the bernette makes the wider overlock, up to 7 mm against 5.1; the Janome the longer stitch, up to 5 mm against 4 (manufacturer's stated values).

Parameter
Identity
Use tier F2 — Intermediate F2 — Intermediate
Price
Price ~450–1000 € 649 €
Universal specs
Weight 7.2 kg —
Category specs
Maximum threads 4 4
Available stitches 15 —
Stitch types 2-thread overlock, 3-thread overlock, 4-thread overlock, Narrow 3-thread overlock, 2-thread rolled hem, 3-thread rolled hem, 2-thread flatlock, 3-thread flatlock, 3-thread stretch overlock, 2-thread wrapped edge 2-thread overlock, 3-thread overlock, 4-thread overlock
2-thread conversion With accessory With accessory
Differential feed ratio (minimum) 0.6 0.5
Differential feed ratio (maximum) 2 2.2
Stitch length (minimum) 1 mm 1 mm
Stitch length (maximum) 4 mm 5 mm
Overlock width (minimum) 3 mm 3.1 mm
Overlock width (maximum) 7 mm 5.1 mm
Looper threading — Assisted
Needle threader Manual Manual
Rolled hem conversion — Lever
Knife drive Lower —
Adjustable cutting width — Yes
Tension system — Automatic
Space to the right of the needle 87 mm —
Presser foot lift 4.5 mm —
Maximum speed 1300 spm —
Waste collector Yes Yes

The differences that matter

  • Stitch types: 10 against 3 → flatlock, rolled hems, stretch overlock and wrapped edge are listed only on the bernette.
  • Overlock width: 7 mm against 5.1 mm → on the Janome the overlock edge is almost two millimetres narrower.
  • Stitch length: 4 mm against 5 mm → stitches between 4 and 5 mm are possible only on the Janome.

Which one to choose

Choose bernette 44 FUNLOCK if…

You need wide overlock edges and a broad repertoire: ten stitch types, with flatlock, 2-thread and 3-thread rolled hems, stretch overlock and wrapped edge. Stitch length stops at 4 mm and the differential feed (the feed dogs that move the fabric at different speeds) at 2.

See the bernette 44 FUNLOCK sheet →

Choose Janome MyLock 644D if…

You prefer automatic tension, assisted looper threading and a rolled hem lever. Stitch length reaches 5 mm and the differential feed 2.2. The overlock stays at 5.1 mm and the stitch list has three entries: 2-, 3- and 4-thread overlock.

See the Janome MyLock 644D sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.