Alfa Overlock 8703 vs bernette 44 FUNLOCK
Technical comparison · Overlockers and sergers
Two 4-thread sergers that both declare 1300 stitches per minute. On comparable data, what separates them is maximum stitch length: 5 mm on the Alfa, 4 mm on the bernette.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | 664 € | ~450–1000 € |
| Universal specs | ||
| Weight | — | 7.2 kg |
| Power | 120 W | — |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Available stitches | — | 15 |
| Stitch types | — | 2-thread overlock, 3-thread overlock, 4-thread overlock, Narrow 3-thread overlock, 2-thread rolled hem, 3-thread rolled hem, 2-thread flatlock, 3-thread flatlock, 3-thread stretch overlock, 2-thread wrapped edge |
| 2-thread conversion | — | With accessory |
| Differential feed ratio (minimum) | — | 0.6 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 4 mm |
| Overlock width (minimum) | — | 3 mm |
| Overlock width (maximum) | — | 7 mm |
| Needle threader | Manual | Manual |
| Retractable upper knife | Yes | — |
| Knife drive | — | Lower |
| Adjustable cutting width | Yes | — |
| Tension system | Manual dials | — |
| Space to the right of the needle | — | 87 mm |
| Presser foot lift | — | 4.5 mm |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | — | Yes |
The differences that matter
- Maximum stitch length: 5 mm vs 4 mm → only the Alfa makes stitches of 5 mm; the bernette stops at 4 mm. Both start at 1 mm.
Manufacturer-declared values.
Which one to choose
Choose Alfa Overlock 8703 if…
You need a stitch longer than 4 mm: the Alfa Overlock 8703 goes up to 5 mm. It also has a disengageable upper knife (it can be switched off to sew without trimming) and an adjustable cutting width. If your work never goes past 4 mm, that advantage does not matter to you.
Choose bernette 44 FUNLOCK if…
You need stretch overlock, flatlock or rolled hem: the bernette 44 FUNLOCK declares them among its 15 stitches, with 2-thread conversion by accessory, and leaves 87 mm to the right of the needle for the fabric. The trade-off: the stitch stops at 4 mm.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.