Baby Lock Enlighten vs bernette 44 FUNLOCK
Technical comparison · Overlockers and sergers
Two four-thread sergers with different set-ups: the Enlighten relies on air threading of the loopers and automatic tension, while the bernette 44 FUNLOCK lists 15 stitches and 2-thread conversion with an accessory.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | — | ~450–1000 € |
| Universal specs | ||
| Dimensions (W×D×H) | 33.66 × 26.67 × 26.04 cm | — |
| Weight | 7.48 kg | 7.2 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, maximum | 2 | — |
| Available stitches | — | 15 |
| Stitch types | Wave stitch | 2-thread overlock, 3-thread overlock, 4-thread overlock, Narrow 3-thread overlock, 2-thread rolled hem, 3-thread rolled hem, 2-thread flatlock, 3-thread flatlock, 3-thread stretch overlock, 2-thread wrapped edge |
| 2-thread conversion | — | With accessory |
| Differential feed | Yes | — |
| Differential feed ratio (minimum) | — | 0.6 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | — | 1 mm |
| Stitch length (maximum) | 4 mm | 4 mm |
| Overlock width (minimum) | — | 3 mm |
| Overlock width (maximum) | 7.5 mm | 7 mm |
| Looper threading | Air (jet-air) | — |
| Needle threader | — | Manual |
| Knife drive | — | Lower |
| Tension system | Automatic | — |
| Space to the right of the needle | — | 87 mm |
| Presser foot lift | — | 4.5 mm |
| Maximum speed | — | 1300 spm |
| Waste collector | — | Yes |
The differences that matter
- Air-threaded loopers on the Enlighten → the lower threads are not threaded by hand.
- Automatic tension on the Enlighten → no dial to touch up when moving from one fabric to another.
- 15 listed stitches on the bernette → 2-, 3- and 4-thread overlock, rolled hem and flatlock are all in the manufacturer's list.
Which one to choose
Choose Baby Lock Enlighten if…
For sewing different garments and changing thread often: the loopers (the parts that carry the lower threads) are threaded by air and the tension sets itself, so threading and tension adjustments are not redone by hand between jobs. The overlock width goes up to 7.5 mm.
Choose bernette 44 FUNLOCK if…
For alternating overlock, rolled hem and 2- and 3-thread flatlock, with 15 listed stitches. 2-thread conversion needs an accessory, the differential feed (which adjusts how the fabric advances to limit waviness and puckering) is set between 0.6 and 2, the needle threader is manual and the overlock width goes up to 7 mm.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.