bernette 44 FUNLOCK vs Brother 1034D
Technical comparison · Overlockers and sergers
Two four-thread overlockers in the same class and with the same stated speed. The difference is in the stitches: the bernette lists ten stitch types and 2-thread with accessory, the Brother four types and no 2-thread conversion.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | ~450–1000 € | ~200–450 € |
| Universal specs | ||
| Weight | 7.2 kg | — |
| Voltage | — | 110 V |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, maximum | — | 2 |
| Available stitches | 15 | — |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock, Narrow 3-thread overlock, 2-thread rolled hem, 3-thread rolled hem, 2-thread flatlock, 3-thread flatlock, 3-thread stretch overlock, 2-thread wrapped edge | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem |
| 2-thread conversion | With accessory | None |
| Differential feed ratio (minimum) | 0.6 | — |
| Differential feed ratio (maximum) | 2 | — |
| Stitch length (minimum) | 1 mm | — |
| Stitch length (maximum) | 4 mm | — |
| Overlock width (minimum) | 3 mm | 5 mm |
| Overlock width (maximum) | 7 mm | 7 mm |
| Needle threader | Manual | — |
| Retractable upper knife | — | Yes |
| Knife drive | Lower | Lower |
| Adjustable cutting width | — | Yes |
| Tension system | — | Manual dials |
| Free arm | — | Yes |
| Space to the right of the needle | 87 mm | — |
| Presser foot lift | 4.5 mm | — |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Stitch types: ten vs four → flatlock, stretch and wrapped edge only on the bernette.
- 2-thread conversion: with accessory vs none → 2-thread is only sewn on the bernette.
- Overlock width: 3–7 mm vs 5–7 mm → the bernette goes down to narrower edges.
Which one to choose
Choose bernette 44 FUNLOCK if…
You want flatlock, stretch overlock, wrapped edge and rolled hem in 2-thread too. The overlock runs from 3 to 7 mm (manufacturer-stated values). The 2-thread needs an accessory.
Choose Brother 1034D if…
4-thread and 3-thread overlock, narrow 3-thread and 3-thread rolled hem are enough for you, and you want a 5 to 7 mm edge with free arm, disengageable upper knife and adjustable presser foot pressure. Its stitch list includes neither flatlock nor 2-thread.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.