bernette 44 FUNLOCK vs PFAFF admire air 5000
Technical comparison · Overlockers and sergers
Two four-thread overlockers of the same standing, separated by one choice: the bernette lists ten stitch types, the PFAFF lists six but threads its loopers with air and has a built-in needle threader.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | ~450–1000 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 35.1 × 28.4 × 29.9 cm |
| Weight | 7.2 kg | 7.8 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | — | 1 |
| Needles, maximum | — | 2 |
| Available stitches | 15 | — |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock, Narrow 3-thread overlock, 2-thread rolled hem, 3-thread rolled hem, 2-thread flatlock, 3-thread flatlock, 3-thread stretch overlock, 2-thread wrapped edge | 4-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread rolled hem, 2-thread flatlock |
| 2-thread conversion | With accessory | With accessory |
| Differential feed ratio (minimum) | 0.6 | 0.5 |
| Differential feed ratio (maximum) | 2 | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 4 mm | 5 mm |
| Overlock width (minimum) | 3 mm | 3.3 mm |
| Overlock width (maximum) | 7 mm | 7.5 mm |
| Looper threading | — | Air (jet-air) |
| Needle threader | Manual | Built-in |
| Knife drive | Lower | — |
| Adjustable cutting width | — | Yes |
| Tension system | — | Manual dials |
| Space to the right of the needle | 87 mm | — |
| Presser foot lift | 4.5 mm | — |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Stitch types: 10 against 6 → only the bernette lists 2-thread and 3-thread overlock, 3-thread stretch overlock and 2-thread wrapped edge.
- Threading: air-threaded loopers and built-in needle threader on the PFAFF, manual needle threader on the bernette → on the bernette the needle is threaded by hand at every thread change.
Which one to choose
Choose bernette 44 FUNLOCK if…
You sew stretch knits and light fabrics and want the 3-thread stretch overlock or the 2-thread wrapped edge, which the PFAFF does not list. The needle is threaded by hand and stitch length tops out at 4 mm instead of 5 (manufacturer's stated values).
Choose PFAFF admire air 5000 if…
You change thread often and want the loopers threaded by air and the needle by the built-in threader. In exchange the list shows six stitch types, with no stretch overlock and no wrapped edge.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.