Brother 1034D vs PFAFF admire air 5000

Technical comparison · Overlockers and sergers

In brief

Two four-thread overlockers stating the same speed, 1300 stitches per minute. The Brother lists four stitch types and has a free arm; the PFAFF lists six, including flatlock and 2-thread rolled hem with the conversion accessory.

Parameter
Identity
Use tier F2 — Intermediate F2 — Intermediate
Price
Price ~200–450 € ~1000–2200 €
Universal specs
Dimensions (W×D×H) — 35.1 × 28.4 × 29.9 cm
Weight — 7.8 kg
Voltage 110 V —
Category specs
Maximum threads 4 4
Needles, minimum — 1
Needles, maximum 2 2
Stitch types 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem 4-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread rolled hem, 2-thread flatlock
2-thread conversion None With accessory
Differential feed ratio (minimum) — 0.5
Differential feed ratio (maximum) — 2
Stitch length (minimum) — 1 mm
Stitch length (maximum) — 5 mm
Overlock width (minimum) 5 mm 3.3 mm
Overlock width (maximum) 7 mm 7.5 mm
Looper threading — Air (jet-air)
Needle threader — Built-in
Retractable upper knife Yes —
Knife drive Lower —
Adjustable cutting width Yes Yes
Tension system Manual dials Manual dials
Free arm Yes —
Adjustable presser foot pressure Yes —
Maximum speed 1300 spm 1300 spm
Waste collector Yes Yes

The differences that matter

  • Stitch types: 4 against 6 → 2-thread and 3-thread flatlock and 2-thread rolled hem are listed only on the PFAFF.
  • 2-thread conversion: absent on the Brother, with accessory on the PFAFF → the Brother does not sew 2-thread.
  • Supply voltage: 110 V stated for the Brother → compatibility with your home mains has to be checked.

Which one to choose

Choose Brother 1034D if…

You sew overlock seams and 3-thread rolled hems on assorted fabrics and need the free arm, adjustable presser foot pressure and a disengageable upper knife. There is no 2-thread conversion and no flatlock. The listing gives 110 V: check your mains voltage before buying.

See the Brother 1034D sheet →

Choose PFAFF admire air 5000 if…

You want to sew flatlock and 2-thread rolled hem (with the conversion accessory), with air-threaded loopers and a built-in needle threader. The overlock reaches 7.5 mm against 7 mm (manufacturer's stated values).

See the PFAFF admire air 5000 sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.