Baby Lock Acclaim vs bernette 64 AIRLOCK
Technical comparison · Overlockers and sergers
Two overlockers with air threading for the loopers, so neither needs the thread guided by hand. The choice comes down to what you want from the machine: the Baby Lock Acclaim offers a built-in needle threader, automatic tension and speed, the bernette 64 AIRLOCK a wider set of stitches.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | ~2200–5000 € | ~1000–2200 € |
| Category specs | ||
| Maximum threads | 4 | — |
| Needle system | — | ELx705 |
| Needles, maximum | 2 | — |
| Available stitches | — | 16 |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock, Wave stitch | 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge |
| 2-thread conversion | Built-in | — |
| Stitch length (minimum) | 0.75 mm | — |
| Stitch length (maximum) | 4 mm | — |
| Overlock width (minimum) | 1.5 mm | 3 mm |
| Overlock width (maximum) | 7.5 mm | 7 mm |
| Looper threading | Air (jet-air) | Air (jet-air) |
| Needle threader | Built-in | Manual |
| Tension system | Automatic | — |
| Free arm | — | Yes |
| Space to the right of the needle | — | 130 mm |
| Presser foot lift | 6 mm | — |
| Knee lifter | — | Yes |
| Adjustable presser foot pressure | Yes | — |
| Maximum speed | 1500 spm | 1300 spm |
| Waste collector | — | Yes |
The differences that matter
- Needle threader: built in on the Acclaim, manual on the bernette → on the bernette the needle is threaded by hand at every change.
- Top speed: 1500 against 1300 stitches per minute → at full speed the Acclaim sews 200 more stitches a minute.
- Overlock width: 1.5 to 7.5 mm against 3 to 7 mm → the Acclaim goes down to 1.5 mm, the bernette not below 3.
Which one to choose
Choose Baby Lock Acclaim if…
On Monday morning you have a run of identical pieces to overlock and want to adjust as little as possible: tension is automatic, the needle threader is built in, and the machine reaches 1500 stitches per minute (manufacturer-declared value). Overlock width starts at 1.5 mm. The trade-off: the spec sheet lists four stitch types against the bernette's ten, so if you need flatlock or rolled hem, check they are included.
Choose bernette 64 AIRLOCK if…
On Monday morning you need rolled hems, flatlock and wrapped edges as well as overlocking: there are ten stitch types. You get 130 mm to the right of the needle for moving the work through, and a knee lift that raises the presser foot without leaving the fabric. The trade-off: the needle threader is manual and top speed is 1300 stitches per minute.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.