bernette 44 FUNLOCK vs bernette 64 AIRLOCK
Technical comparison · Overlockers and sergers
Two overlockers from the same brand, with the same list of stitch types and 1300 stitches per minute (manufacturer-declared value). The deciding difference is the room to the right of the needle: 87 mm on the 44 FUNLOCK, 130 mm on the 64 AIRLOCK.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | ~450–1000 € | ~1000–2200 € |
| Universal specs | ||
| Weight | 7.2 kg | — |
| Category specs | ||
| Maximum threads | 4 | — |
| Needle system | — | ELx705 |
| Available stitches | 15 | 16 |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock, Narrow 3-thread overlock, 2-thread rolled hem, 3-thread rolled hem, 2-thread flatlock, 3-thread flatlock, 3-thread stretch overlock, 2-thread wrapped edge | 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge |
| 2-thread conversion | With accessory | — |
| Differential feed ratio (minimum) | 0.6 | — |
| Differential feed ratio (maximum) | 2 | — |
| Stitch length (minimum) | 1 mm | — |
| Stitch length (maximum) | 4 mm | — |
| Overlock width (minimum) | 3 mm | 3 mm |
| Overlock width (maximum) | 7 mm | 7 mm |
| Looper threading | — | Air (jet-air) |
| Needle threader | Manual | Manual |
| Knife drive | Lower | — |
| Free arm | — | Yes |
| Space to the right of the needle | 87 mm | 130 mm |
| Presser foot lift | 4.5 mm | — |
| Knee lifter | — | Yes |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Room to the right of the needle: 87 mm against 130 mm → wide pieces pass more comfortably on the 64 AIRLOCK.
- Differential feed: 0.6 to 2, listed on the 44 FUNLOCK → adjusts how stretchy fabrics advance.
Which one to choose
Choose bernette 44 FUNLOCK if…
On Monday morning you finish jersey garments and want to adjust the feed: differential feed runs from 0.6 to 2, stitch length from 1 to 4 mm, and 2-thread conversion is done with an accessory. It weighs 7.2 kg. The trade-off: you have 87 mm to the right of the needle, 43 mm less than the other, so wide pieces have less room to pass.
Choose bernette 64 AIRLOCK if…
On Monday morning you work on wide pieces that must pass to the right of the needle: you get 130 mm, plus a free arm and a knee lift that raises the presser foot without leaving the fabric. The loopers are threaded by air. Both machines share the manual needle threader.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.