BERNINA L 460 vs PFAFF admire air 5000
Technical comparison · Overlockers and sergers
Two 4-thread sergers, and threading is what decides it: the PFAFF admire air 5000 carries thread through the loopers with a jet of air and has a built-in needle threader, while the BERNINA L 460 is threaded entirely by hand but offers more stitch types. Values quoted are declared by the manufacturer.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price | ~1000–2200 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | 32 × 30.5 × 29.5 cm | 35.1 × 28.4 × 29.9 cm |
| Weight | 9.8 kg | 7.8 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | 1 | 1 |
| Needles, maximum | 2 | 2 |
| Available stitches | 16 | — |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge, 2-thread overlock | 4-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread rolled hem, 2-thread flatlock |
| 2-thread conversion | — | With accessory |
| Differential feed ratio (minimum) | 0.7 | 0.5 |
| Differential feed ratio (maximum) | 2 | 2 |
| Stitch length (minimum) | 0.8 mm | 1 mm |
| Stitch length (maximum) | 4 mm | 5 mm |
| Overlock width (minimum) | 3 mm | 3.3 mm |
| Overlock width (maximum) | 9 mm | 7.5 mm |
| Looper threading | Manual | Air (jet-air) |
| Needle threader | Manual | Built-in |
| Rolled hem conversion | Lever | — |
| Knife drive | Upper thread | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | Manual dials |
| Knee lifter | Yes | — |
| Adjustable presser foot pressure | Yes | — |
| Maximum speed | 1500 spm | 1300 spm |
| Waste collector | — | Yes |
The differences that matter
- Threading: air-driven loopers and built-in needle threader on the admire air 5000, fully manual on the L 460 → setup time at every thread change differs.
- Overlock width: up to 9 mm against 7.5 mm → the L 460 finishes wider seam allowances in one pass.
- Stitch types: standard 3-thread overlock, stretch overlock and wrapped edge only on the L 460 → the admire air 5000 has a narrower choice.
- Weight: 9.8 kg against 7.8 kg → the admire air 5000 is 2 kg lighter to move.
Which one to choose
Choose BERNINA L 460 if…
You sew a lot and need 3-thread overlock, stretch overlock or wrapped edge, on top of flatlock and rolled hem; the knee lift and adjustable pressure help on long garments. The machine runs up to a declared 1500 stitches per minute. You accept threading loopers and needle by hand at each thread change, and a heavier machine.
Choose PFAFF admire air 5000 if…
You change thread often, say a different color for each garment, and hand threading puts you off: the air jet for the loopers and the built-in needle threader do the work. The trim catcher keeps the table clear. You give up standard 3-thread overlock, stretch overlock and wrapped edge; 2-thread needs an accessory.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.