Elna eXtend 864air vs PFAFF admire air 5000
Technical comparison · Overlockers and sergers
Two 4-thread sergers with air-threaded loopers and the same declared speed, 1300 stitches per minute. What differs is the switch to 2-thread stitches: built into the Elna, an accessory on the PFAFF.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price | ~1000–2200 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | 34.7 × 28.4 × 29.9 cm | 35.1 × 28.4 × 29.9 cm |
| Weight | 7.9 kg | 7.8 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | 1 | 1 |
| Needles, maximum | 2 | 2 |
| Available stitches | 13 | — |
| Stitch types | 4-thread overlock, 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread flatlock, 2-thread rolled hem | 4-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread rolled hem, 2-thread flatlock |
| 2-thread conversion | Built-in | With accessory |
| Differential feed ratio (minimum) | 0.5 | 0.5 |
| Differential feed ratio (maximum) | 2 | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 5 mm |
| Overlock width (minimum) | 5.5 mm | 3.3 mm |
| Overlock width (maximum) | 7.5 mm | 7.5 mm |
| Looper threading | Air (jet-air) | Air (jet-air) |
| Needle threader | Built-in | Built-in |
| Rolled hem conversion | Lever | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | Manual dials |
| Presser foot lift | 5.5 mm | — |
| Adjustable presser foot pressure | Yes | — |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- 2-thread conversion: built-in (Elna), accessory (PFAFF) → the Elna switches stitch with nothing to mount; on the PFAFF the accessory has to be fitted and kept at hand.
- Minimum overlock width: 5.5 mm vs 3.3 mm → the PFAFF finishes narrower edges; the Elna does not go below 5.5 mm. Both reach 7.5 mm.
Manufacturer-declared values.
Which one to choose
Choose Elna eXtend 864air if…
You alternate 2-thread rolled hems or flatlock with 4-thread overlock in the same job: the built-in conversion saves mounting and storing an accessory each time. The trade-off is width: the overlock starts at 5.5 mm, so narrow edges are out.
Choose PFAFF admire air 5000 if…
You work on narrow edges: the overlock starts at 3.3 mm and the spec sheet also lists a narrow 3-thread overlock. 2-thread stitches remain possible, but only with the accessory fitted each time.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.