PFAFF hobbylock 2.5 vs Singer Heavy Duty 0460
Technical comparison · Overlockers and sergers
Two four-thread sergers with nearly identical declared adjustments: differential feed, stitch length and overlock width coincide. What decides it is weight and the free arm, the section that opens up under the needle so sleeves and cuffs can be sewn in the round.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F1 — Entry | F2 — Intermediate |
| Price | ||
| Price | ~200–450 € | ~200–450 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 30.9 × 28.6 × 27.6 cm |
| Weight | 8.7 kg | 6.7 kg |
| Power | — | 110 W |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | 1 | 1 |
| Needles, maximum | 2 | 2 |
| Available stitches | — | 13 |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 3-thread rolled hem, 2-thread overlock, 2-thread flatlock, 2-thread wrapped edge, 2-thread rolled hem | — |
| 2-thread conversion | With accessory | With accessory |
| Differential feed ratio (minimum) | 0.6 | 0.7 |
| Differential feed ratio (maximum) | 2 | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 4 mm | 4 mm |
| Overlock width (minimum) | 3 mm | 3 mm |
| Overlock width (maximum) | 7 mm | 6.7 mm |
| Looper threading | Manual | Manual |
| Needle threader | Manual | — |
| Rolled hem conversion | Lever | Lever |
| Retractable upper knife | Yes | Yes |
| Knife drive | Upper thread | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | Manual dials |
| Free arm | — | Yes |
| Presser foot lift | 4.5 mm | — |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1100 spm | 1200 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Weight 8.7 kg against 6.7 kg → the Singer is 2 kg less to carry from shelf to table.
- Free arm declared on the Singer → sleeves and cuffs go around the sewing bed as tubes.
- Top speed 1100 against 1200 stitches per minute (manufacturer's declared values) → a small gap that does not change the kind of work.
Which one to choose
Choose PFAFF hobbylock 2.5 if…
Finishing edges on jersey and stretch fabrics with 4-, 3- and 2-thread overlock, flatlock and rolled hem, with the machine staying in one place. The trade-off is owning the heavier of the two, with the lower declared top speed.
Choose Singer Heavy Duty 0460 if…
Sleeve hems, cuffs and trouser legs sewn in the round, where the free arm lets the tube of fabric turn around the bed. The trade-off: on stitch adjustments the data give it nothing extra over the PFAFF, so the advantage lies entirely in the build.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.