PFAFF admire air 5000 vs Singer Heavy Duty 0460
Technical comparison · Overlockers and sergers
Two 4-thread sergers with 2-thread conversion by accessory. The deciding point is looper threading: by air on the PFAFF admire air 5000, manual on the Singer Heavy Duty 0460.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | ~1000–2200 € | ~200–450 € |
| Universal specs | ||
| Dimensions (W×D×H) | 35.1 × 28.4 × 29.9 cm | 30.9 × 28.6 × 27.6 cm |
| Weight | 7.8 kg | 6.7 kg |
| Power | — | 110 W |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | 1 | 1 |
| Needles, maximum | 2 | 2 |
| Available stitches | — | 13 |
| Stitch types | 4-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread rolled hem, 2-thread flatlock | — |
| 2-thread conversion | With accessory | With accessory |
| Differential feed ratio (minimum) | 0.5 | 0.7 |
| Differential feed ratio (maximum) | 2 | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 4 mm |
| Overlock width (minimum) | 3.3 mm | 3 mm |
| Overlock width (maximum) | 7.5 mm | 6.7 mm |
| Looper threading | Air (jet-air) | Manual |
| Needle threader | Built-in | — |
| Rolled hem conversion | — | Lever |
| Retractable upper knife | — | Yes |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | Manual dials |
| Free arm | — | Yes |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | 1300 spm | 1200 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Looper threading: air (jet-air) vs manual → on the PFAFF air carries the thread through the loopers; on the Singer you guide it by hand at every change.
- Maximum overlock width: 7.5 mm vs 6.7 mm → the PFAFF has 0.8 mm more for wider edges.
- Maximum stitch length: 5 mm vs 4 mm → the PFAFF makes stitches 1 mm longer.
Manufacturer-declared values.
Which one to choose
Choose PFAFF admire air 5000 if…
You change thread colour often and want air to thread the loopers; the needle threader is built in too. The overlock goes up to 7.5 mm and the stitch to 5 mm. The trade-off is weight: 7.8 kg against 6.7 kg.
Choose Singer Heavy Duty 0460 if…
You want a 6.7 kg machine with a free arm, a disengageable upper knife (it can be switched off to sew without trimming) and adjustable presser foot pressure. The trade-offs: the loopers are threaded by hand, the overlock goes up to 6.7 mm and the stitch to 4 mm.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.