PFAFF admire air 5000 vs PFAFF hobbylock 2.5
Technical comparison · Overlockers and sergers
The admire air 5000 focuses on faster looper threading, the hobbylock 2.5 is the essential version of the same PFAFF range: the choice is between convenience when changing thread and a lower entry price.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F1 — Entry |
| Price | ||
| Price | ~1000–2200 € | ~200–450 € |
| Universal specs | ||
| Dimensions (W×D×H) | 35.1 × 28.4 × 29.9 cm | — |
| Weight | 7.8 kg | 8.7 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | 1 | 1 |
| Needles, maximum | 2 | 2 |
| Stitch types | 4-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread rolled hem, 2-thread flatlock | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 3-thread rolled hem, 2-thread overlock, 2-thread flatlock, 2-thread wrapped edge, 2-thread rolled hem |
| 2-thread conversion | With accessory | With accessory |
| Differential feed ratio (minimum) | 0.5 | 0.6 |
| Differential feed ratio (maximum) | 2 | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 4 mm |
| Overlock width (minimum) | 3.3 mm | 3 mm |
| Overlock width (maximum) | 7.5 mm | 7 mm |
| Looper threading | Air (jet-air) | Manual |
| Needle threader | Built-in | Manual |
| Rolled hem conversion | — | Lever |
| Retractable upper knife | — | Yes |
| Knife drive | — | Upper thread |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | Manual dials |
| Presser foot lift | — | 4.5 mm |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | 1300 spm | 1100 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Looper threading: air-jet on the admire air 5000, manual on the hobbylock 2.5 → on the admire air 5000, thread changes take fewer manual steps.
- Needle threader: built-in on the admire air 5000, manual on the hobbylock 2.5.
- Stitch length: 5 mm on the admire air 5000 versus 4 mm on the hobbylock 2.5 → useful for wider basting and gathering.
- Maximum speed: 1300 stitches per minute on the admire air 5000 versus 1100 on the hobbylock 2.5.
Which one to choose
Choose PFAFF admire air 5000 if…
Whoever changes thread colour often benefits from the admire air 5000's air-jet looper threading and built-in needle threader, which skip the manual step at every change. Stitch length reaches 5 mm and top speed 1300 stitches per minute, useful on long seams and basting.
Choose PFAFF hobbylock 2.5 if…
Whoever accepts manual looper and needle threading picks the hobbylock 2.5, the simplest configuration in the range: stitch length reaches 4 mm and top speed 1100 stitches per minute, enough for non-intensive use.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.