Juki MO-1000 vs PFAFF admire air 5000
Technical comparison · Overlockers and sergers
Two overlockers at a similar level, both with air-assisted looper threading (the two lower hooks thread with a puff of air) and a built-in needle threader. The decider is the switch to 2 threads: built into the Juki, an accessory on the PFAFF. Figures are manufacturer-declared.
| Parameter | ||
|---|---|---|
| Awards | — | |
| Identity | ||
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price | ~1000–2200 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | 33 × 28 × 31 cm | 35.1 × 28.4 × 29.9 cm |
| Weight | 9 kg | 7.8 kg |
| Category specs | ||
| Maximum threads | — | 4 |
| Needles, minimum | 1 | 1 |
| Needles, maximum | 2 | 2 |
| Stitch types | 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem | 4-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread rolled hem, 2-thread flatlock |
| 2-thread conversion | Built-in | With accessory |
| Differential feed ratio (minimum) | 0.7 | 0.5 |
| Differential feed ratio (maximum) | 2 | 2 |
| Stitch length (minimum) | — | 1 mm |
| Stitch length (maximum) | — | 5 mm |
| Overlock width (minimum) | — | 3.3 mm |
| Overlock width (maximum) | — | 7.5 mm |
| Looper threading | Air (jet-air) | Air (jet-air) |
| Needle threader | Built-in | Built-in |
| Retractable upper knife | Yes | — |
| Knife drive | Upper thread | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | — | Manual dials |
| Presser foot lift | 8 mm | — |
| Adjustable presser foot pressure | Yes | — |
| Maximum speed | 1500 spm | 1300 spm |
| Waste collector | Yes | Yes |
SewingSpecs Awards
Most capable Advanced
Highest technical score among the 4 sheets in the Overlockers and sergers category (advanced tier): 100/100.
How we assign awards →Best value Advanced
Best balance of technical score and price among the 4 sheets in the Overlockers and sergers category (advanced tier): technical score 100/100. The price used is the sheet's estimated range.
How we assign awards →No awards in this tier.
The differences that matter
- 2-thread conversion built-in or by accessory → on the Juki the switch is made on the machine; on the PFAFF the accessory is needed.
Which one to choose
Choose Juki MO-1000 if…
You change often between 3–4 thread and 2-thread work: the Juki makes the switch on the machine itself, no accessory, and is rated up to 1500 stitches per minute. The trade-off is weight: 9 kg, 1.2 kg more than the PFAFF.
Choose PFAFF admire air 5000 if…
You need 2-thread work now and then and don't mind fitting an accessory when the job calls for it. The trade-off: that extra step, and a rated speed of 1300 stitches per minute against the Juki's 1500.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.