HUSQVARNA VIKING AMBER S|100 vs Singer Heavy Duty 0460

Technical comparison · Overlockers and sergers

In brief

Two four-thread overlockers at the same level, with similar stated speeds. They are chosen on looper threading (the loopers carry the thread under the fabric): assisted on the Husqvarna, manual on the Singer.

Parameter
Identity
Use tier F2 — Intermediate F2 — Intermediate
Price
Price ~450–1000 € ~200–450 €
Universal specs
Dimensions (W×D×H) — 30.9 × 28.6 × 27.6 cm
Weight 9 kg 6.7 kg
Power — 110 W
Category specs
Maximum threads 4 4
Needles, minimum — 1
Needles, maximum — 2
Available stitches 16 13
Stitch types 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 3-thread stretch overlock, 2-thread overlock, 2-thread wrapped edge, 2-thread rolled hem, 2-thread flatlock, Chain stitch —
2-thread conversion With accessory With accessory
Differential feed ratio (minimum) — 0.7
Differential feed ratio (maximum) — 2
Stitch length (minimum) 1 mm 1 mm
Stitch length (maximum) 5 mm 4 mm
Overlock width (minimum) — 3 mm
Overlock width (maximum) 7 mm 6.7 mm
Looper threading Assisted Manual
Rolled hem conversion Lever Lever
Retractable upper knife Yes Yes
Adjustable cutting width Yes Yes
Tension system — Manual dials
Free arm — Yes
Adjustable presser foot pressure Yes Yes
Maximum speed 1300 spm 1200 spm
Waste collector Yes Yes

The differences that matter

  • Assisted against manual looper threading → at every thread change the Singer needs more steps by hand
  • 9 kg against 6.7 kg → the Singer is easier to move
  • 16 available stitches against 13 → three more settings on the Husqvarna

Which one to choose

Choose HUSQVARNA VIKING AMBER S|100 if…

Choose the Husqvarna if you change thread often: assisted looper threading removes a step that stays manual on the Singer. Stitch length reaches 5 mm and speed 1300 stitches per minute (manufacturer's stated values). The trade-off: 9 kg to move, 2.3 kg more than the Singer.

See the HUSQVARNA VIKING AMBER S|100 sheet →

Choose Singer Heavy Duty 0460 if…

Choose the Singer if the machine has to come off the shelf and go back after every job: it weighs 6.7 kg. It has a free arm and differential feed from 0.7 to 2. The trade-off: hand-threaded loopers, stitch length up to 4 mm and 1200 stitches per minute.

See the Singer Heavy Duty 0460 sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.