HUSQVARNA VIKING AMBER S|100 vs PFAFF hobbylock 2.5
Technical comparison · Overlockers and sergers
Two four-thread overlockers with an overlock up to 7 mm and 2-thread with accessory. Looper threading sets them apart: assisted on the Amber S|100, manual on the Pfaff.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F1 — Entry |
| Price | ||
| Price | ~450–1000 € | ~200–450 € |
| Universal specs | ||
| Weight | 9 kg | 8.7 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | — | 1 |
| Needles, maximum | — | 2 |
| Available stitches | 16 | — |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 3-thread stretch overlock, 2-thread overlock, 2-thread wrapped edge, 2-thread rolled hem, 2-thread flatlock, Chain stitch | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 3-thread rolled hem, 2-thread overlock, 2-thread flatlock, 2-thread wrapped edge, 2-thread rolled hem |
| 2-thread conversion | With accessory | With accessory |
| Differential feed ratio (minimum) | — | 0.6 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 4 mm |
| Overlock width (minimum) | — | 3 mm |
| Overlock width (maximum) | 7 mm | 7 mm |
| Looper threading | Assisted | Manual |
| Needle threader | — | Manual |
| Rolled hem conversion | Lever | Lever |
| Retractable upper knife | Yes | Yes |
| Knife drive | — | Upper thread |
| Adjustable cutting width | Yes | Yes |
| Tension system | — | Manual dials |
| Presser foot lift | — | 4.5 mm |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1300 spm | 1100 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Looper threading: assisted vs manual → on the Pfaff every thread change is done by hand.
- Maximum stitch length: 5 vs 4 mm → longer stitch on the Amber.
- Maximum speed: 1300 vs 1100 stitches per minute, stated values → the Amber's limit is higher.
- Stitch types: 11, including chain stitch, vs 10 → chain stitch only on the Amber.
Which one to choose
Choose HUSQVARNA VIKING AMBER S|100 if…
You change thread often and also want chain stitch. Looper threading is assisted, stitch length runs from 1 to 5 mm and the stated speed reaches 1300 stitches per minute. It weighs 9 kg.
Choose PFAFF hobbylock 2.5 if…
Your threads stay the same for long stretches, threading by hand does not bother you and ten stitch types are enough. Stitch length reaches 4 mm and the stated speed 1100 stitches per minute, in 8.7 kg.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.