HUSQVARNA VIKING AMBER S|100 vs PFAFF admire air 5000
Technical comparison · Overlockers and sergers
Two four-thread overlockers with the same stated speed, 1300 stitches per minute. Looper threading differs: assisted on the Husqvarna, air-driven (jet-air, a jet of air carries the thread along its path) on the PFAFF, which also has a built-in needle threader.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | ~450–1000 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 35.1 × 28.4 × 29.9 cm |
| Weight | 9 kg | 7.8 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | — | 1 |
| Needles, maximum | — | 2 |
| Available stitches | 16 | — |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 3-thread stretch overlock, 2-thread overlock, 2-thread wrapped edge, 2-thread rolled hem, 2-thread flatlock, Chain stitch | 4-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread rolled hem, 2-thread flatlock |
| 2-thread conversion | With accessory | With accessory |
| Differential feed ratio (minimum) | — | 0.5 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 5 mm |
| Overlock width (minimum) | — | 3.3 mm |
| Overlock width (maximum) | 7 mm | 7.5 mm |
| Looper threading | Assisted | Air (jet-air) |
| Needle threader | — | Built-in |
| Rolled hem conversion | Lever | — |
| Retractable upper knife | Yes | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | — | Manual dials |
| Adjustable presser foot pressure | Yes | — |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Air-driven loopers and built-in needle threader against assisted threading → fewer steps by hand at every thread change on the PFAFF
- 11 stitch types against 6 → wrapped edge, chain stitch and stretch overlock only on the Husqvarna
- 9 kg against 7.8 kg → the PFAFF is easier to move
Which one to choose
Choose HUSQVARNA VIKING AMBER S|100 if…
Choose the Husqvarna if you want the wider repertoire: 11 stitch types against 6, including 3-thread overlock, 3-thread stretch overlock, 2-thread wrapped edge and chain stitch. It has the rolled-hem lever and a disengageable upper knife. The trade-off: assisted rather than air threading, and 9 kg against 7.8 kg.
Choose PFAFF admire air 5000 if…
Choose the PFAFF if you thread often: air-driven loopers and a built-in needle threader. Overlock width runs from 3.3 to 7.5 mm and differential feed from 0.5 to 2 (manufacturer's stated values). The trade-off: six stitch types, without standard 3-thread overlock or stretch overlock.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.