HUSQVARNA VIKING AMBER S|100 vs Janome AT 2000D
Technical comparison · Overlockers and sergers
Same declared top speed, 1300 stitches per minute, and the same stitch length, 1 to 5 mm. What changes is how much of the work the machine does for you: the Janome has 2-thread conversion built in and threads its loopers by air, the Husqvarna Viking asks for an accessory and assisted threading.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price | ~450–1000 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 34.7 × 28.4 × 29.9 cm |
| Weight | 9 kg | 7.9 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Available stitches | 16 | — |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 3-thread stretch overlock, 2-thread overlock, 2-thread wrapped edge, 2-thread rolled hem, 2-thread flatlock, Chain stitch | — |
| 2-thread conversion | With accessory | Built-in |
| Differential feed ratio (minimum) | — | 0.5 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 5 mm |
| Overlock width (maximum) | 7 mm | — |
| Looper threading | Assisted | Air (jet-air) |
| Needle threader | — | Built-in |
| Rolled hem conversion | Lever | Lever |
| Retractable upper knife | Yes | Yes |
| Adjustable cutting width | Yes | Yes |
| Tension system | — | Manual dials |
| Presser foot lift | — | 5.5 mm |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- 2-thread conversion: with accessory against built-in → on the Janome switching to 2-thread needs nothing to fit.
- Looper threading: assisted against air, with a built-in needle threader on the Janome → a thread change takes fewer hand steps on the Janome.
- Weight: 9 kg against 7.9 kg → 1.1 kg more to move with the Husqvarna Viking.
Which one to choose
Choose HUSQVARNA VIKING AMBER S|100 if…
Jobs with wrapped edge, 2- and 3-thread flatlock, stretch overlock and chain stitch among the declared stitches. The trade-off: an accessory for 2-thread, assisted threading and a heavier machine to move.
Choose Janome AT 2000D if…
Frequent thread changes and switching between 3 and 2 threads without fitting accessories: air threading, a needle threader and conversion are all built in.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.