Elna eXtend 864air vs HUSQVARNA VIKING AMBER S|100
Technical comparison · Overlockers and sergers
Same declared top speed and the same stitch length, 1 to 5 mm. Elna automates threading and the switch to 2-thread, the Husqvarna Viking declares more stitch types.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price | ~1000–2200 € | ~450–1000 € |
| Universal specs | ||
| Dimensions (W×D×H) | 34.7 × 28.4 × 29.9 cm | — |
| Weight | 7.9 kg | 9 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | 1 | — |
| Needles, maximum | 2 | — |
| Available stitches | 13 | 16 |
| Stitch types | 4-thread overlock, 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread flatlock, 2-thread rolled hem | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 3-thread stretch overlock, 2-thread overlock, 2-thread wrapped edge, 2-thread rolled hem, 2-thread flatlock, Chain stitch |
| 2-thread conversion | Built-in | With accessory |
| Differential feed ratio (minimum) | 0.5 | — |
| Differential feed ratio (maximum) | 2 | — |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 5 mm |
| Overlock width (minimum) | 5.5 mm | — |
| Overlock width (maximum) | 7.5 mm | 7 mm |
| Looper threading | Air (jet-air) | Assisted |
| Needle threader | Built-in | — |
| Rolled hem conversion | Lever | Lever |
| Retractable upper knife | — | Yes |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | — |
| Presser foot lift | 5.5 mm | — |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Threading and 2-thread: air-threaded loopers, needle threader and built-in 2-thread conversion on the Elna against assisted threading and an accessory on the Husqvarna Viking → on the Elna the switch to 2-thread needs no accessory and a thread change takes fewer hand steps.
- Stitch types: 6 against 11 → only the Husqvarna Viking declares stretch overlock, wrapped edge and chain stitch.
- Weight: 7.9 against 9 kg → 1.1 kg less to move with the Elna.
Which one to choose
Choose Elna eXtend 864air if…
Frequent thread changes with 4- and 3-thread overlock, rolled hem and flatlock, and a switch to 2-thread with no accessory. The trade-off is range: six declared stitch types, with no stretch overlock, wrapped edge or chain stitch.
Choose HUSQVARNA VIKING AMBER S|100 if…
Jobs that call for 3-thread stretch overlock, wrapped edge or chain stitch. The trade-off: an accessory for 2-thread, assisted threading and more weight to move.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.