Brother 1034D vs Singer Heavy Duty 0460
Technical comparison · Overlockers and sergers
Two 4-thread sergers with a free arm, a disengageable upper knife and manual tension dials. The deciding difference is 2-thread conversion: none on the Brother 1034D, by accessory on the Singer Heavy Duty 0460.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | ~200–450 € | ~200–450 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 30.9 × 28.6 × 27.6 cm |
| Weight | — | 6.7 kg |
| Power | — | 110 W |
| Voltage | 110 V | — |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | — | 1 |
| Needles, maximum | 2 | 2 |
| Available stitches | — | 13 |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem | — |
| 2-thread conversion | None | With accessory |
| Differential feed ratio (minimum) | — | 0.7 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | — | 1 mm |
| Stitch length (maximum) | — | 4 mm |
| Overlock width (minimum) | 5 mm | 3 mm |
| Overlock width (maximum) | 7 mm | 6.7 mm |
| Looper threading | — | Manual |
| Rolled hem conversion | — | Lever |
| Retractable upper knife | Yes | Yes |
| Knife drive | Lower | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | Manual dials |
| Free arm | Yes | Yes |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1300 spm | 1200 spm |
| Waste collector | Yes | Yes |
The differences that matter
- 2-thread conversion: none vs by accessory → the Brother does not sew 2-thread; the Singer does, with the accessory fitted.
- Minimum overlock width: 5 mm vs 3 mm → the Singer works narrower edges. Maximum is 7 mm against 6.7 mm.
- Maximum speed: 1300 vs 1200 stitches per minute → the Brother declares 100 stitches per minute more.
Manufacturer-declared values.
Which one to choose
Choose Brother 1034D if…
The 3- and 4-thread stitches are enough for you (4- and 3-thread overlock, narrow 3-thread, 3-thread rolled hem); it runs at 1300 stitches per minute. The trade-offs: no 2-thread stitches, the overlock starts at 5 mm, and the declared voltage is 110 V, to check against your mains.
Choose Singer Heavy Duty 0460 if…
You need 2-thread stitches: the Singer gets them with the accessory. The overlock goes down to 3 mm and there is a lever-operated rolled-hem conversion. The trade-offs: 1200 stitches per minute and an overlock that tops out at 6.7 mm.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.