Brother 1034D vs PFAFF hobbylock 2.5

Technical comparison · Overlockers and sergers

In brief

Two four-thread overlockers, both with a disengageable upper knife. The stitch repertoire decides it: the PFAFF lists ten stitch types, flatlock and 2-thread stitches included, the Brother four.

Parameter
Identity
Use tier F2 — Intermediate F1 — Entry
Price
Price ~200–450 € ~200–450 €
Universal specs
Weight — 8.7 kg
Voltage 110 V —
Category specs
Maximum threads 4 4
Needles, minimum — 1
Needles, maximum 2 2
Stitch types 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 3-thread rolled hem, 2-thread overlock, 2-thread flatlock, 2-thread wrapped edge, 2-thread rolled hem
2-thread conversion None With accessory
Differential feed ratio (minimum) — 0.6
Differential feed ratio (maximum) — 2
Stitch length (minimum) — 1 mm
Stitch length (maximum) — 4 mm
Overlock width (minimum) 5 mm 3 mm
Overlock width (maximum) 7 mm 7 mm
Looper threading — Manual
Needle threader — Manual
Rolled hem conversion — Lever
Retractable upper knife Yes Yes
Knife drive Lower Upper thread
Adjustable cutting width Yes Yes
Tension system Manual dials Manual dials
Free arm Yes —
Presser foot lift — 4.5 mm
Adjustable presser foot pressure Yes Yes
Maximum speed 1300 spm 1100 spm
Waste collector Yes Yes

The differences that matter

  • 10 stitch types against 4 → flatlock, wrapped edge and 2-thread hems can only be sewn on the PFAFF
  • Overlock width 5–7 mm against 3–7 mm → the PFAFF also makes narrower seams
  • 1300 against 1100 stitches per minute → long seams go faster on the Brother

Which one to choose

Choose Brother 1034D if…

Choose the Brother if you mostly sew 3- and 4-thread overlock seams and 3-thread rolled hems and want the higher speed of the two: 1300 stitches per minute against 1100 (manufacturer's stated values). The trade-off: no flatlock and no 2-thread stitches, since there is no 2-thread conversion. It has a free arm, which lets tubular parts such as sleeves and cuffs slide onto the arm.

See the Brother 1034D sheet →

Choose PFAFF hobbylock 2.5 if…

Choose the PFAFF if you want flatlock, wrapped edge or a 2-thread rolled hem; 2-thread conversion is done with an accessory. Overlock width starts at 3 mm against 5 mm on the Brother, and differential feed (the feed dogs that control how much fabric advances under the foot) runs from 0.6 to 2. The trade-off: 1100 stitches per minute.

See the PFAFF hobbylock 2.5 sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.