Brother 1034D vs Juki MO-1000

Technical comparison · Overlockers and sergers

In brief

Two overlockers separated by automation. The Juki has air-driven loopers, a needle threader and 2-thread conversion built in and reaches 1500 stitches per minute; the Brother lists four stitch types and has no 2-thread conversion.

Parameter
Awards —
Identity
Use tier F2 — Intermediate F3 — Advanced
Price
Price ~200–450 € ~1000–2200 €
Universal specs
Dimensions (W×D×H) — 33 × 28 × 31 cm
Weight — 9 kg
Voltage 110 V —
Category specs
Maximum threads 4 —
Needles, minimum — 1
Needles, maximum 2 2
Stitch types 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem
2-thread conversion None Built-in
Differential feed ratio (minimum) — 0.7
Differential feed ratio (maximum) — 2
Overlock width (minimum) 5 mm —
Overlock width (maximum) 7 mm —
Looper threading — Air (jet-air)
Needle threader — Built-in
Retractable upper knife Yes Yes
Knife drive Lower Upper thread
Adjustable cutting width Yes Yes
Tension system Manual dials —
Free arm Yes —
Presser foot lift — 8 mm
Adjustable presser foot pressure Yes Yes
Maximum speed 1300 spm 1500 spm
Waste collector Yes Yes

SewingSpecs Awards

Brother 1034D

No awards in this tier.

Juki MO-1000

Most capable Advanced

Highest technical score among the 4 sheets in the Overlockers and sergers category (advanced tier): 100/100.

How we assign awards →

Best value Advanced

Best balance of technical score and price among the 4 sheets in the Overlockers and sergers category (advanced tier): technical score 100/100. The price used is the sheet's estimated range.

How we assign awards →

The differences that matter

  • 2-thread conversion built in against none → 2-thread overlock only on the Juki
  • Air-driven loopers and built-in needle threader → fewer steps by hand at every thread change on the Juki
  • Presser foot lift 8 mm on the Juki → thicker layers fit under the foot
  • 1500 against 1300 stitches per minute → long seams go faster on the Juki

Which one to choose

Choose Brother 1034D if…

Choose the Brother if 3- and 4-thread overlock and a 3-thread rolled hem are enough and you want a free arm for sleeves and cuffs. Overlock width runs from 5 to 7 mm, speed 1300 stitches per minute (manufacturer's stated values). The trade-off: no flatlock and no 2-thread stitches.

See the Brother 1034D sheet →

Choose Juki MO-1000 if…

Choose the Juki if you sew in batches and threading is lost time: air-driven loopers (a jet of air carries the thread along its path) and a built-in needle threader. It lists 1500 stitches per minute, 2-thread overlock and 3-thread flatlock, and a presser foot that lifts 8 mm. The trade-off: 9 kg to move.

See the Juki MO-1000 sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.