Brother 1034D vs Janome AT 2000D

Technical comparison · Overlockers and sergers

In brief

Two four-thread overlockers with manual tension dials and the same stated speed, 1300 stitches per minute. Threading decides it: on the Janome AT 2000D the loopers are air-threaded and the needle threader is built in.

Parameter
Identity
Use tier F2 — Intermediate F3 — Advanced
Price
Price ~200–450 € ~1000–2200 €
Universal specs
Dimensions (W×D×H) — 34.7 × 28.4 × 29.9 cm
Weight — 7.9 kg
Voltage 110 V —
Category specs
Maximum threads 4 4
Needles, maximum 2 —
Stitch types 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem —
2-thread conversion None Built-in
Differential feed ratio (minimum) — 0.5
Differential feed ratio (maximum) — 2
Stitch length (minimum) — 1 mm
Stitch length (maximum) — 5 mm
Overlock width (minimum) 5 mm —
Overlock width (maximum) 7 mm —
Looper threading — Air (jet-air)
Needle threader — Built-in
Rolled hem conversion — Lever
Retractable upper knife Yes Yes
Knife drive Lower —
Adjustable cutting width Yes Yes
Tension system Manual dials Manual dials
Free arm Yes —
Presser foot lift — 5.5 mm
Adjustable presser foot pressure Yes Yes
Maximum speed 1300 spm 1300 spm
Waste collector Yes Yes

The differences that matter

  • Threading: air-threaded loopers and built-in needle threader on the Janome → changing thread takes less hand work.
  • 2-thread overlock: no conversion on the Brother, built in on the Janome → the accessory-free 2-thread is the Janome's.
  • Overlock width: 5–7 mm → wide seam on the Brother.

Which one to choose

Choose Brother 1034D if…

You sew wide edges, 5 to 7 mm (manufacturer-stated values), and need the free arm. The upper knife can be disengaged and presser foot pressure is adjustable. There is no 2-thread conversion.

See the Brother 1034D sheet →

Choose Janome AT 2000D if…

You change thread often and want the machine to help: air-threaded loopers, built-in needle threader and built-in 2-thread conversion, no accessory needed. The presser foot lifts 5.5 mm. Tension stays on dials: threading is assisted, adjustment is not.

See the Janome AT 2000D sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.