BERNINA L 460 vs Juki MO-1000
Technical comparison · Overlockers and sergers
Same declared top speed, 1500 stitches per minute, and the same range of differential feed. They separate on stitch range and threading: the BERNINA has more stitch types, the Juki threads its loopers by air.
| Parameter | ||
|---|---|---|
| Awards | — | |
| Identity | ||
| Use tier | F3 — Advanced | F3 — Advanced |
| Price | ||
| Price | ~1000–2200 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | 32 × 30.5 × 29.5 cm | 33 × 28 × 31 cm |
| Weight | 9.8 kg | 9 kg |
| Category specs | ||
| Maximum threads | 4 | — |
| Needles, minimum | 1 | 1 |
| Needles, maximum | 2 | 2 |
| Available stitches | 16 | — |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge, 2-thread overlock | 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem |
| 2-thread conversion | — | Built-in |
| Differential feed ratio (minimum) | 0.7 | 0.7 |
| Differential feed ratio (maximum) | 2 | 2 |
| Stitch length (minimum) | 0.8 mm | — |
| Stitch length (maximum) | 4 mm | — |
| Overlock width (minimum) | 3 mm | — |
| Overlock width (maximum) | 9 mm | — |
| Looper threading | Manual | Air (jet-air) |
| Needle threader | Manual | Built-in |
| Rolled hem conversion | Lever | — |
| Retractable upper knife | — | Yes |
| Knife drive | Upper thread | Upper thread |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | — |
| Presser foot lift | — | 8 mm |
| Knee lifter | Yes | — |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1500 spm | 1500 spm |
| Waste collector | — | Yes |
SewingSpecs Awards
No awards in this tier.
Most capable Advanced
Highest technical score among the 4 sheets in the Overlockers and sergers category (advanced tier): 100/100.
How we assign awards →Best value Advanced
Best balance of technical score and price among the 4 sheets in the Overlockers and sergers category (advanced tier): technical score 100/100. The price used is the sheet's estimated range.
How we assign awards →The differences that matter
- Stitch types: 10 against 6 → the BERNINA adds 3-thread stretch overlock, 2-thread flatlock, 2-thread rolled hem and wrapped edge.
- Threading: manual loopers and needle against air-threaded loopers with built-in needle threader → a thread change is hand work on the BERNINA, with fewer steps on the Juki.
- 2-thread conversion declared built-in on the Juki → switching to 2-thread needs nothing to fit.
Which one to choose
Choose BERNINA L 460 if…
Work that switches stitch type often: stretch overlock, 2- and 3-thread flatlock, 2-thread rolled hem, wrapped edge, with the knee lift keeping both hands on the fabric. The trade-off: loopers and needle are threaded by hand at every thread change.
Choose Juki MO-1000 if…
Frequent thread changes and 2-thread seams with no accessory: air threading, a needle threader and built-in conversion, with the presser foot lifting up to 8 mm. The range is shorter: the declared stitches do not include stretch overlock, wrapped edge or 2-thread flatlock.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.