BERNINA L 460 vs Janome AT 2000D

Technical comparison · Overlockers and sergers

In brief

Two sergers of the same level that solve the job differently: the BERNINA has the wider overlock and a knee lift for the presser foot, the Janome threads the loopers, the two arms that form the stitch under the bed, and the needle by itself.

Parameter
Identity
Use tier F3 — Advanced F3 — Advanced
Price
Price ~1000–2200 € ~1000–2200 €
Universal specs
Dimensions (W×D×H) 32 × 30.5 × 29.5 cm 34.7 × 28.4 × 29.9 cm
Weight 9.8 kg 7.9 kg
Category specs
Maximum threads 4 4
Needles, minimum 1 —
Needles, maximum 2 —
Available stitches 16 —
Stitch types 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge, 2-thread overlock —
2-thread conversion — Built-in
Differential feed ratio (minimum) 0.7 0.5
Differential feed ratio (maximum) 2 2
Stitch length (minimum) 0.8 mm 1 mm
Stitch length (maximum) 4 mm 5 mm
Overlock width (minimum) 3 mm —
Overlock width (maximum) 9 mm —
Looper threading Manual Air (jet-air)
Needle threader Manual Built-in
Rolled hem conversion Lever Lever
Retractable upper knife — Yes
Knife drive Upper thread —
Adjustable cutting width Yes Yes
Tension system Manual dials Manual dials
Presser foot lift — 5.5 mm
Knee lifter Yes —
Adjustable presser foot pressure Yes Yes
Maximum speed 1500 spm 1300 spm
Waste collector — Yes

The differences that matter

  • Threading: manual loopers and needle on the BERNINA, air-threaded loopers with built-in needle threader on the Janome → a thread change is hand work in one case, left to the air jet in the other.
  • Stitch length: 0.8 to 4 mm against 1 to 5 mm → the Janome reaches longer stitches, the BERNINA goes down to shorter ones.
  • Weight: 9.8 kg against 7.9 kg → almost 2 kg less to carry with the Janome.
  • Top speed: 1500 against 1300 stitches per minute (manufacturer's declared values) → long seams run faster on the BERNINA.

Which one to choose

Choose BERNINA L 460 if…

Edges that call for a wide overlock, up to 9 mm, with both hands staying on the fabric thanks to the knee lift. The price is threading: loopers and needle are threaded by hand at every thread change.

See the BERNINA L 460 sheet →

Choose Janome AT 2000D if…

Work with frequent thread changes, where air threading and the built-in needle threader save redoing everything by hand, with 2-thread conversion already built in. The trade-off is a lower declared top speed.

See the Janome AT 2000D sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.