BERNINA L 460 vs HUSQVARNA VIKING AMBER S|100
Technical comparison · Overlockers and sergers
The L 460 is built for more intensive sewing, the Amber S|100 for more occasional use; the difference that matters most at the work table is overlock width, which reaches 9 mm on the L 460 against 7 mm on the Amber S|100.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price | ~1000–2200 € | ~450–1000 € |
| Universal specs | ||
| Dimensions (W×D×H) | 32 × 30.5 × 29.5 cm | — |
| Weight | 9.8 kg | 9 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | 1 | — |
| Needles, maximum | 2 | — |
| Available stitches | 16 | 16 |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge, 2-thread overlock | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 3-thread stretch overlock, 2-thread overlock, 2-thread wrapped edge, 2-thread rolled hem, 2-thread flatlock, Chain stitch |
| 2-thread conversion | — | With accessory |
| Differential feed ratio (minimum) | 0.7 | — |
| Differential feed ratio (maximum) | 2 | — |
| Stitch length (minimum) | 0.8 mm | 1 mm |
| Stitch length (maximum) | 4 mm | 5 mm |
| Overlock width (minimum) | 3 mm | — |
| Overlock width (maximum) | 9 mm | 7 mm |
| Looper threading | Manual | Assisted |
| Needle threader | Manual | — |
| Rolled hem conversion | Lever | Lever |
| Retractable upper knife | — | Yes |
| Knife drive | Upper thread | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | — |
| Knee lifter | Yes | — |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1500 spm | 1300 spm |
| Waste collector | — | Yes |
The differences that matter
- Overlock width: 9 mm on the L 460 versus 7 mm on the Amber S|100 → the L 460 covers thicker edges or fraying fabrics better.
- Stitch length: 5 mm on the Amber S|100 versus 4 mm on the L 460 → the Amber S|100 goes further for basting and gathering.
- Maximum speed: 1500 stitches per minute on the L 460 versus 1300 on the Amber S|100.
- Looper threading: manual on the L 460, assisted on the Amber S|100.
Which one to choose
Choose BERNINA L 460 if…
Whoever finishes heavy fabrics or wants a wider, more covering edge picks the L 460's overlock width of up to 9 mm; its top speed of 1500 stitches per minute helps on long seams. In exchange you accept entirely manual looper threading.
Choose HUSQVARNA VIKING AMBER S|100 if…
Whoever needs a longer stitch for basting or gathering gets a maximum length of 5 mm on the Amber S|100 against 4 mm on the L 460, with assisted rather than manual looper threading. Overlock width stays narrower, though.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.