bernette 44 FUNLOCK vs Janome AT 2000D
Technical comparison · Overlockers and sergers
Two four-thread overlockers with the same stated speed, 1300 stitches per minute. What decides it is how much threading is left to do by hand: the Janome has air-driven loopers, a needle threader and 2-thread conversion built in, while the bernette has a manual needle threader and 2-thread conversion with an accessory.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price | ~450–1000 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 34.7 × 28.4 × 29.9 cm |
| Weight | 7.2 kg | 7.9 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Available stitches | 15 | — |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock, Narrow 3-thread overlock, 2-thread rolled hem, 3-thread rolled hem, 2-thread flatlock, 3-thread flatlock, 3-thread stretch overlock, 2-thread wrapped edge | — |
| 2-thread conversion | With accessory | Built-in |
| Differential feed ratio (minimum) | 0.6 | 0.5 |
| Differential feed ratio (maximum) | 2 | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 4 mm | 5 mm |
| Overlock width (minimum) | 3 mm | — |
| Overlock width (maximum) | 7 mm | — |
| Looper threading | — | Air (jet-air) |
| Needle threader | Manual | Built-in |
| Rolled hem conversion | — | Lever |
| Retractable upper knife | — | Yes |
| Knife drive | Lower | — |
| Adjustable cutting width | — | Yes |
| Tension system | — | Manual dials |
| Space to the right of the needle | 87 mm | — |
| Presser foot lift | 4.5 mm | 5.5 mm |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- 2-thread conversion built in against with accessory → on the Janome you switch to 2 threads without fitting anything
- Air-driven loopers and built-in needle threader against manual needle threader → fewer steps by hand at every thread change on the Janome
- Presser foot lift 5.5 mm against 4.5 mm → more room under the foot on the Janome
- 87 mm to the right of the needle on the bernette → more room for fabric while sewing
Which one to choose
Choose bernette 44 FUNLOCK if…
Choose the bernette if you work on bulky pieces: it has 87 mm to the right of the needle and weighs 7.2 kg against the Janome's 7.9 kg. It lists 15 stitches, including flatlock, wrapped edge and 2- and 3-thread rolled hems. The trade-off: a hand-threaded needle, an accessory to switch to 2 threads, stitch length up to 4 mm and a presser foot that lifts 4.5 mm (manufacturer's stated values).
Choose Janome AT 2000D if…
Choose the Janome if you switch between 3 and 2 threads often or change thread frequently: built-in conversion, air-driven loopers (a jet of air carries the thread along its path) and a needle threader. The presser foot lifts 5.5 mm and stitch length reaches 5 mm. The trade-off: 7.9 kg to move.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.