bernette 44 FUNLOCK vs Elna eXtend 864air
Technical comparison · Overlockers and sergers
The 864air automates threading and 2-thread conversion, the 44 FUNLOCK needs more manual steps but offers a slightly shorter stitch and lower presser foot lift; the choice depends on how often you switch settings.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price | ~450–1000 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 34.7 × 28.4 × 29.9 cm |
| Weight | 7.2 kg | 7.9 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | — | 1 |
| Needles, maximum | — | 2 |
| Available stitches | 15 | 13 |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock, Narrow 3-thread overlock, 2-thread rolled hem, 3-thread rolled hem, 2-thread flatlock, 3-thread flatlock, 3-thread stretch overlock, 2-thread wrapped edge | 4-thread overlock, 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread flatlock, 2-thread rolled hem |
| 2-thread conversion | With accessory | Built-in |
| Differential feed ratio (minimum) | 0.6 | 0.5 |
| Differential feed ratio (maximum) | 2 | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 4 mm | 5 mm |
| Overlock width (minimum) | 3 mm | 5.5 mm |
| Overlock width (maximum) | 7 mm | 7.5 mm |
| Looper threading | — | Air (jet-air) |
| Needle threader | Manual | Built-in |
| Rolled hem conversion | — | Lever |
| Knife drive | Lower | — |
| Adjustable cutting width | — | Yes |
| Tension system | — | Manual dials |
| Space to the right of the needle | 87 mm | — |
| Presser foot lift | 4.5 mm | 5.5 mm |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Stitch length: 5 mm on the 864air versus 4 mm on the 44 FUNLOCK → useful for wider basting and gathering.
- Presser foot lift: 5.5 mm on the 864air versus 4.5 mm on the 44 FUNLOCK → the 864air clears thicker layers under the foot.
- 2-thread conversion and needle threader: built-in on the 864air, accessory-based and manual on the 44 FUNLOCK.
Which one to choose
Choose bernette 44 FUNLOCK if…
Whoever accepts 2-thread conversion via a separate accessory and a manual needle threader picks the 44 FUNLOCK, still a complete machine for everyday 4-thread overlock work.
Choose Elna eXtend 864air if…
Whoever switches often between overlock and 2-thread rolled hem benefits from the 864air's built-in conversion and built-in needle threader. Stitch length reaches 5 mm against 4 mm on the 44 FUNLOCK, and presser foot lift of 5.5 mm clears thicker layers under the foot.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.