bernette 44 FUNLOCK vs BERNINA L 460
Technical comparison · Overlockers and sergers
Ten declared stitch types each and a similar stitch length. The two separate on overlock width, declared speed and weight: the bernette is the lighter, the BERNINA the wider and faster.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price | ~450–1000 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 32 × 30.5 × 29.5 cm |
| Weight | 7.2 kg | 9.8 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | — | 1 |
| Needles, maximum | — | 2 |
| Available stitches | 15 | 16 |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock, Narrow 3-thread overlock, 2-thread rolled hem, 3-thread rolled hem, 2-thread flatlock, 3-thread flatlock, 3-thread stretch overlock, 2-thread wrapped edge | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge, 2-thread overlock |
| 2-thread conversion | With accessory | — |
| Differential feed ratio (minimum) | 0.6 | 0.7 |
| Differential feed ratio (maximum) | 2 | 2 |
| Stitch length (minimum) | 1 mm | 0.8 mm |
| Stitch length (maximum) | 4 mm | 4 mm |
| Overlock width (minimum) | 3 mm | 3 mm |
| Overlock width (maximum) | 7 mm | 9 mm |
| Looper threading | — | Manual |
| Needle threader | Manual | Manual |
| Rolled hem conversion | — | Lever |
| Knife drive | Lower | Upper thread |
| Adjustable cutting width | — | Yes |
| Tension system | — | Manual dials |
| Space to the right of the needle | 87 mm | — |
| Presser foot lift | 4.5 mm | — |
| Knee lifter | — | Yes |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | 1300 spm | 1500 spm |
| Waste collector | Yes | — |
The differences that matter
- Maximum overlock width: 7 against 9 mm → the BERNINA covers wider edges.
- Top speed: 1300 against 1500 stitches per minute (manufacturer's declared values) → long seams take less time on the BERNINA.
- Weight: 7.2 against 9.8 kg → the bernette is 2.6 kg less to move.
Which one to choose
Choose bernette 44 FUNLOCK if…
Bulky garments with a lot of fabric to pass to the right of the needle, where the declared space is 87 mm. The trade-off: a narrower overlock and a lower declared top speed.
Choose BERNINA L 460 if…
Wide edges and long seams one after another, with the knee lift keeping both hands on the fabric. The trade-off: it is the heavier of the two.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.