Baby Lock Acclaim vs PFAFF admire air 5000
Technical comparison · Overlockers and sergers
The two machines thread the same way, by air, and reach the same maximum overlock width. What differs is who sets the tension and how much they can finish: the Baby Lock Acclaim sets it itself, the PFAFF admire air 5000 has dials plus flatlock, rolled hem and adjustable differential feed. Figures quoted are manufacturer-declared.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | ~2200–5000 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 35.1 × 28.4 × 29.9 cm |
| Weight | — | 7.8 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | — | 1 |
| Needles, maximum | 2 | 2 |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock, Wave stitch | 4-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread rolled hem, 2-thread flatlock |
| 2-thread conversion | Built-in | With accessory |
| Differential feed ratio (minimum) | — | 0.5 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | 0.75 mm | 1 mm |
| Stitch length (maximum) | 4 mm | 5 mm |
| Overlock width (minimum) | 1.5 mm | 3.3 mm |
| Overlock width (maximum) | 7.5 mm | 7.5 mm |
| Looper threading | Air (jet-air) | Air (jet-air) |
| Needle threader | Built-in | Built-in |
| Adjustable cutting width | — | Yes |
| Tension system | Automatic | Manual dials |
| Presser foot lift | 6 mm | — |
| Adjustable presser foot pressure | Yes | — |
| Maximum speed | 1500 spm | 1300 spm |
| Waste collector | — | Yes |
The differences that matter
- Automatic tension on the Acclaim, manual dials on the PFAFF → on the PFAFF the dials are touched up at each fabric change.
- Flatlock and rolled hem on the PFAFF, not among the Acclaim's stitches → rolled hems and flat seams only with the PFAFF.
- 2-thread conversion built in on the Acclaim, with an accessory on the PFAFF → on the PFAFF, 2-thread overlock means fitting a part.
- Overlock from 1.5 mm on the Acclaim, from 3.3 mm on the PFAFF → finer edges on light fabric only with the Acclaim.
Which one to choose
Choose Baby Lock Acclaim if…
Choose the Acclaim if you sew in short sessions on varying fabrics, say a cotton and then a fine jersey: tension adapts without turning dials, and with 2-thread conversion built in a light edge needs nothing fitted. The trade-off: rolled hem and flatlock are not among its stitches.
Choose PFAFF admire air 5000 if…
Choose the PFAFF if you work with knits and stretch fabrics: differential feed (it sets how much the fabric is pulled or held back under the foot) runs from 0.5 to 2, to stop a seam rippling or, the other way round, to gather. Rolled hem and flatlock in 2 and 3 threads finish edges and flat seams, and the bin keeps trimmings tidy. You accept setting the dials at every fabric change and fitting an accessory for 2-thread overlock.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.