Baby Lock Acclaim vs Janome AT 2000D
Technical comparison · Overlockers and sergers
Two sergers with air-threaded loopers, needle threader and 2-thread conversion all built in. The deciding difference is thread tension: automatic on the Baby Lock Acclaim, manual dials on the Janome AT 2000D.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price | ~2200–5000 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 34.7 × 28.4 × 29.9 cm |
| Weight | — | 7.9 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, maximum | 2 | — |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock, Wave stitch | — |
| 2-thread conversion | Built-in | Built-in |
| Differential feed ratio (minimum) | — | 0.5 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | 0.75 mm | 1 mm |
| Stitch length (maximum) | 4 mm | 5 mm |
| Overlock width (minimum) | 1.5 mm | — |
| Overlock width (maximum) | 7.5 mm | — |
| Looper threading | Air (jet-air) | Air (jet-air) |
| Needle threader | Built-in | Built-in |
| Rolled hem conversion | — | Lever |
| Retractable upper knife | — | Yes |
| Adjustable cutting width | — | Yes |
| Tension system | Automatic | Manual dials |
| Presser foot lift | 6 mm | 5.5 mm |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1500 spm | 1300 spm |
| Waste collector | — | Yes |
The differences that matter
- Tension system: automatic vs manual dials → on the Baby Lock the machine sets the tensions; on the Janome you set them yourself.
- Stitch length: 0.75–4 mm vs 1–5 mm → the Baby Lock goes shorter, the Janome goes longer.
- Maximum speed: 1500 vs 1300 stitches per minute → the Baby Lock declares 200 stitches per minute more.
Manufacturer-declared values.
Which one to choose
Choose Baby Lock Acclaim if…
You move often between threads or fabrics and do not want to set tensions by hand; it runs at 1500 stitches per minute and the stitch starts at 0.75 mm, with an overlock from 1.5 to 7.5 mm. The trade-off: the stitch stops at 4 mm.
Choose Janome AT 2000D if…
You prefer to set the tensions yourself with the dials and need a stitch up to 5 mm; it has differential feed from 0.5 to 2, a disengageable upper knife and lever-operated rolled-hem conversion. The trade-off: 1300 stitches per minute and no automatic tension.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.