Baby Lock Acclaim vs Elna eXtend 864air

Technical comparison · Overlockers and sergers

In brief

Both machines thread the same way, with air-threaded loopers and an automatic needle threader, and both have 2-thread conversion built in. What differs is who sets the tension and what each can finish: the Baby Lock Acclaim sets it by itself, the Elna eXtend 864air has dials but adds flatlock and rolled hem. Figures quoted are manufacturer-declared.

Parameter
Identity
Use tier F2 — Intermediate F3 — Advanced
Price
Price ~2200–5000 € ~1000–2200 €
Universal specs
Dimensions (W×D×H) — 34.7 × 28.4 × 29.9 cm
Weight — 7.9 kg
Category specs
Maximum threads 4 4
Needles, minimum — 1
Needles, maximum 2 2
Available stitches — 13
Stitch types 2-thread overlock, 3-thread overlock, 4-thread overlock, Wave stitch 4-thread overlock, 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread flatlock, 2-thread rolled hem
2-thread conversion Built-in Built-in
Differential feed ratio (minimum) — 0.5
Differential feed ratio (maximum) — 2
Stitch length (minimum) 0.75 mm 1 mm
Stitch length (maximum) 4 mm 5 mm
Overlock width (minimum) 1.5 mm 5.5 mm
Overlock width (maximum) 7.5 mm 7.5 mm
Looper threading Air (jet-air) Air (jet-air)
Needle threader Built-in Built-in
Rolled hem conversion — Lever
Adjustable cutting width — Yes
Tension system Automatic Manual dials
Presser foot lift 6 mm 5.5 mm
Adjustable presser foot pressure Yes Yes
Maximum speed 1500 spm 1300 spm
Waste collector — Yes

The differences that matter

  • Automatic tension on the Acclaim, manual dials on the 864air → on the 864air the dials are touched up at each fabric change.
  • Flatlock and rolled hem (by lever) on the 864air, not among the Acclaim's stitches → rolled hems and flat seams only with the 864air.
  • Maximum stitch length 5 mm against 4 mm → the 864air reaches a longer stitch, useful on heavy fabric.

Which one to choose

Choose Baby Lock Acclaim if…

Choose the Acclaim if you sew different fabrics in one session, say a cotton and then a fine jersey: tension adapts without turning dials, and the overlock narrows down to 1.5 mm for fine edges on light fabric. The trade-off is range: only 2-, 3- and 4-thread overlock and a wave stitch, with no flatlock or rolled hem.

See the Baby Lock Acclaim sheet →

Choose Elna eXtend 864air if…

Choose the 864air if finishing is part of the job: 2- and 3-thread flatlock for flat seams, 2- and 3-thread rolled hem through the conversion lever, and differential feed (it sets how much the fabric is pulled or held back under the foot) from 0.5 to 2 to keep knits from rippling. You accept touching up the dials at every fabric change and a lower declared top speed.

See the Elna eXtend 864air sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.