Baby Lock Acclaim vs Brother 1034D
Technical comparison · Overlockers and sergers
What decides this is who sets up the machine: on the Baby Lock Acclaim tension and threading are automatic, while the Brother 1034D works with dials and offers a disengageable knife and a free arm in return. Anyone who changes thread and fabric often looks at the first; anyone sewing cuffs and sleeves at the second. Figures quoted are manufacturer-declared.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | ~2200–5000 € | ~200–450 € |
| Universal specs | ||
| Voltage | — | 110 V |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, maximum | 2 | 2 |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock, Wave stitch | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem |
| 2-thread conversion | Built-in | None |
| Stitch length (minimum) | 0.75 mm | — |
| Stitch length (maximum) | 4 mm | — |
| Overlock width (minimum) | 1.5 mm | 5 mm |
| Overlock width (maximum) | 7.5 mm | 7 mm |
| Looper threading | Air (jet-air) | — |
| Needle threader | Built-in | — |
| Retractable upper knife | — | Yes |
| Knife drive | — | Lower |
| Adjustable cutting width | — | Yes |
| Tension system | Automatic | Manual dials |
| Free arm | — | Yes |
| Presser foot lift | 6 mm | — |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1500 spm | 1300 spm |
| Waste collector | — | Yes |
The differences that matter
- Automatic tension on the Acclaim, manual dials on the Brother → on the Brother the dials are touched up at every change of fabric or thread.
- Air-threaded loopers and built-in needle threader on the Acclaim → thread changes take less time.
- Built-in 2-thread conversion on the Acclaim, none on the Brother → the light 2-thread overlock is only possible on the Acclaim.
- Disengageable upper knife and free arm on the Brother → overlocking without trimming, and cuffs and sleeves sewn in the round.
Which one to choose
Choose Baby Lock Acclaim if…
Choose the Acclaim if you change thread and fabric often, say a cotton piece and then a fine jersey: tension adapts without touching anything, the loopers (the two arms that carry the lower threads) are threaded by air and the needle threads itself. 2-thread conversion is built in, so a light edge needs no accessory. You give up rolled hem, which is not among its stitches.
Choose Brother 1034D if…
Choose the Brother if you sew cuffs, sleeves and other tubular pieces: the free arm lets them pass under the needle. The upper knife disengages, so you can overlock an edge that is already trimmed without cutting it again, and there is a 3-thread rolled hem. The trade-off: tension is set by dials at every fabric change and there is no 2-thread conversion.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.