PFAFF hobbylock 2.5 vs W6 Wertarbeit W6 Overlock N 656D Freiarm
Technical comparison · Overlockers and sergers
Two 4-thread sergers. The deciding difference is declared speed: 1100 stitches per minute on the PFAFF hobbylock 2.5, 1300 on the W6 Wertarbeit W6 Overlock N 656D Freiarm.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F1 — Entry | F2 — Intermediate |
| Price | ||
| Price | ~200–450 € | 299 € |
| Universal specs | ||
| Weight | 8.7 kg | 7.35 kg |
| Power | — | 90 W |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | 1 | — |
| Needles, maximum | 2 | 2 |
| Available stitches | — | 16 |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 3-thread rolled hem, 2-thread overlock, 2-thread flatlock, 2-thread wrapped edge, 2-thread rolled hem | — |
| 2-thread conversion | With accessory | — |
| Differential feed ratio (minimum) | 0.6 | — |
| Differential feed ratio (maximum) | 2 | — |
| Stitch length (minimum) | 1 mm | — |
| Stitch length (maximum) | 4 mm | 5 mm |
| Overlock width (minimum) | 3 mm | — |
| Overlock width (maximum) | 7 mm | 7 mm |
| Looper threading | Manual | Assisted |
| Needle threader | Manual | Manual |
| Rolled hem conversion | Lever | — |
| Retractable upper knife | Yes | — |
| Knife drive | Upper thread | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | — |
| Free arm | — | Yes |
| Space to the right of the needle | — | 45 mm |
| Presser foot lift | 4.5 mm | — |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1100 spm | 1300 spm |
| Waste collector | Yes | — |
The differences that matter
- Maximum speed: 1100 vs 1300 stitches per minute → the W6 runs 200 stitches per minute faster.
- Looper threading: manual vs assisted → on the W6 a thread change takes less hand work.
- Maximum stitch length: 4 mm vs 5 mm → the W6 stretches the stitch by 1 mm.
Manufacturer-declared values.
Which one to choose
Choose PFAFF hobbylock 2.5 if…
You want a disengageable upper knife (it can be switched off to sew without trimming), lever-operated rolled-hem conversion and 2-thread conversion by accessory, plus a trim catcher. The declared stitches are ten types, including flatlock and 2-thread wrapped edge. The trade-offs: 1100 stitches per minute, loopers threaded by hand, 8.7 kg.
Choose W6 Wertarbeit W6 Overlock N 656D Freiarm if…
You change thread often and want assisted looper threading; you need a free arm, with 45 mm to the right of the needle, and a stitch up to 5 mm. It runs at 1300 stitches per minute and weighs 7.35 kg.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.