Juki MO-1000 vs W6 Wertarbeit W6 Overlock N 656D Freiarm
Technical comparison · Overlockers and sergers
Two sergers that differ in how they are threaded: the Juki MO-1000 has air-threaded loopers and a built-in needle threader, the W6 Wertarbeit W6 Overlock N 656D Freiarm has assisted looper threading and a needle you thread by hand.
| Parameter | ||
|---|---|---|
| Awards | — | |
| Identity | ||
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price | ~1000–2200 € | 299 € |
| Universal specs | ||
| Dimensions (W×D×H) | 33 × 28 × 31 cm | — |
| Weight | 9 kg | 7.35 kg |
| Power | — | 90 W |
| Category specs | ||
| Maximum threads | — | 4 |
| Needles, minimum | 1 | — |
| Needles, maximum | 2 | 2 |
| Available stitches | — | 16 |
| Stitch types | 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem | — |
| 2-thread conversion | Built-in | — |
| Differential feed ratio (minimum) | 0.7 | — |
| Differential feed ratio (maximum) | 2 | — |
| Stitch length (maximum) | — | 5 mm |
| Overlock width (maximum) | — | 7 mm |
| Looper threading | Air (jet-air) | Assisted |
| Needle threader | Built-in | Manual |
| Retractable upper knife | Yes | — |
| Knife drive | Upper thread | — |
| Adjustable cutting width | Yes | Yes |
| Free arm | — | Yes |
| Space to the right of the needle | — | 45 mm |
| Presser foot lift | 8 mm | — |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1500 spm | 1300 spm |
| Waste collector | Yes | — |
SewingSpecs Awards
Most capable Advanced
Highest technical score among the 4 sheets in the Overlockers and sergers category (advanced tier): 100/100.
How we assign awards →Best value Advanced
Best balance of technical score and price among the 4 sheets in the Overlockers and sergers category (advanced tier): technical score 100/100. The price used is the sheet's estimated range.
How we assign awards →No awards in this tier.
The differences that matter
- Threading: air-threaded loopers and built-in needle threader vs assisted loopers and manual needle → on the Juki the machine threads both loopers and needle; on the W6 you thread the needle yourself.
- Maximum speed: 1500 vs 1300 stitches per minute → the Juki declares 200 stitches per minute more.
Manufacturer-declared values.
Which one to choose
Choose Juki MO-1000 if…
You change thread often and want the machine to thread both loopers and needle; it runs at 1500 stitches per minute and the presser foot lifts 8 mm. 2-thread conversion is built in too. The trade-off: 9 kg against 7.35 kg.
Choose W6 Wertarbeit W6 Overlock N 656D Freiarm if…
You need a free arm, with 45 mm to the right of the needle, at 7.35 kg; the stitch reaches 5 mm and the overlock 7 mm. The trade-off: the needle is threaded by hand and the speed stops at 1300 stitches per minute.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.