Janome AT 2000D vs W6 Wertarbeit W6 Overlock N 656D Freiarm

Technical comparison · Overlockers and sergers

In brief

Two four-thread overlockers with the same stated speed, 1300 stitches per minute. What decides it is threading: air threading of the loopers (the hooks that carry the thread under the fabric) and a built-in needle threader on the Janome, assisted looper threading and a manual needle on the W6.

Parameter
Identity
Use tier F3 — Advanced F2 — Intermediate
Price
Price ~1000–2200 € 299 €
Universal specs
Dimensions (W×D×H) 34.7 × 28.4 × 29.9 cm —
Weight 7.9 kg 7.35 kg
Power — 90 W
Category specs
Maximum threads 4 4
Needles, maximum — 2
Available stitches — 16
2-thread conversion Built-in —
Differential feed ratio (minimum) 0.5 —
Differential feed ratio (maximum) 2 —
Stitch length (minimum) 1 mm —
Stitch length (maximum) 5 mm 5 mm
Overlock width (maximum) — 7 mm
Looper threading Air (jet-air) Assisted
Needle threader Built-in Manual
Rolled hem conversion Lever —
Retractable upper knife Yes —
Adjustable cutting width Yes Yes
Tension system Manual dials —
Free arm — Yes
Space to the right of the needle — 45 mm
Presser foot lift 5.5 mm —
Adjustable presser foot pressure Yes Yes
Maximum speed 1300 spm 1300 spm
Waste collector Yes —

The differences that matter

  • Air (jet-air) against assisted looper threading → on the Janome a jet of air carries the thread into the loopers.
  • Built-in against manual needle threader → on the W6 the needle is threaded by hand.

Which one to choose

Choose Janome AT 2000D if…

For people who move from overlocking to rolled hems and two-thread seams: a lever-operated rolled hem, built-in two-thread conversion, differential feed adjustable from 0.5 to 2 (it sets how much fabric moves forward under the foot), a disengageable upper knife and a trim catcher. The trade-off: tensions are set with manual dials.

See the Janome AT 2000D sheet →

Choose W6 Wertarbeit W6 Overlock N 656D Freiarm if…

Overlocking and multi-stitch work: 16 stitches, up to 2 needles, an overlock width of up to 7 mm and a free arm with 45 mm to the right of the needle. The trade-off: a manual needle threader and looper threading that is only assisted.

See the W6 Wertarbeit W6 Overlock N 656D Freiarm sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.