Janome MyLock 644D vs Singer Heavy Duty 0460
Technical comparison · Overlockers and sergers
Choosing between these two mid-range sergers comes down to where you want the automation: the Janome MyLock 644D sets thread tension by itself and assists looper threading, the Singer Heavy Duty 0460 leaves those steps manual but widens the overlock stitch up to 6.7 mm.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | 649 € | ~200–450 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 30.9 × 28.6 × 27.6 cm |
| Weight | — | 6.7 kg |
| Power | — | 110 W |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | — | 1 |
| Needles, maximum | — | 2 |
| Available stitches | — | 13 |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock | — |
| 2-thread conversion | With accessory | With accessory |
| Differential feed ratio (minimum) | 0.5 | 0.7 |
| Differential feed ratio (maximum) | 2.2 | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 4 mm |
| Overlock width (minimum) | 3.1 mm | 3 mm |
| Overlock width (maximum) | 5.1 mm | 6.7 mm |
| Looper threading | Assisted | Manual |
| Needle threader | Manual | — |
| Rolled hem conversion | Lever | Lever |
| Retractable upper knife | — | Yes |
| Adjustable cutting width | Yes | Yes |
| Tension system | Automatic | Manual dials |
| Free arm | — | Yes |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | — | 1200 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Maximum overlock width: 5.1 mm on the 644D, 6.7 mm on the Singer → wider hems in one pass on the Singer, useful on thick fabric.
- Thread tension: automatic on the 644D, manual dials on the Singer → no adjustment needed on the 644D at every fabric change.
- Looper threading: assisted on the 644D, manual on the Singer.
- Maximum stitch length: 5 mm on the 644D, 4 mm on the Singer → slightly longer stitches on thick fabric with the 644D.
Which one to choose
Choose Janome MyLock 644D if…
Pick the 644D if you want fewer manual steps: tension sets itself and looper threading is assisted rather than fully manual. Stitch length reaches 5 mm, useful on thick fabric, but the overlock stitch stays narrower, up to 5.1 mm.
Choose Singer Heavy Duty 0460 if…
Pick the Singer if you need a wider overlock stitch for decorative hems or thick fabric, up to 6.7 mm versus the 644D's 5.1 mm. In exchange you set tension on the dials and thread the loopers by hand, two steps that take more practice.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.