Janome MyLock 644D vs PFAFF hobbylock 2.5

Technical comparison · Overlockers and sergers

In brief

Anyone getting their first serger mostly decides how much they want the machine to handle: the Janome MyLock 644D automates thread tension and assists looper threading, the PFAFF hobbylock 2.5 leaves those steps manual but offers ten stitch combinations against the Janome's three.

Parameter
Identity
Use tier F2 — Intermediate F1 — Entry
Price
Price 649 € ~200–450 €
Universal specs
Weight — 8.7 kg
Category specs
Maximum threads 4 4
Needles, minimum — 1
Needles, maximum — 2
Stitch types 2-thread overlock, 3-thread overlock, 4-thread overlock 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 3-thread rolled hem, 2-thread overlock, 2-thread flatlock, 2-thread wrapped edge, 2-thread rolled hem
2-thread conversion With accessory With accessory
Differential feed ratio (minimum) 0.5 0.6
Differential feed ratio (maximum) 2.2 2
Stitch length (minimum) 1 mm 1 mm
Stitch length (maximum) 5 mm 4 mm
Overlock width (minimum) 3.1 mm 3 mm
Overlock width (maximum) 5.1 mm 7 mm
Looper threading Assisted Manual
Needle threader Manual Manual
Rolled hem conversion Lever Lever
Retractable upper knife — Yes
Knife drive — Upper thread
Adjustable cutting width Yes Yes
Tension system Automatic Manual dials
Presser foot lift — 4.5 mm
Adjustable presser foot pressure — Yes
Maximum speed — 1100 spm
Waste collector Yes Yes

The differences that matter

  • Stitch types: ten combinations on the hobbylock 2.5 (including flatlock and rolled hem), three on the 644D (overlock only) → anyone who also wants decorative finishing looks at the hobbylock 2.5.
  • Thread tension: automatic on the 644D, manual dials on the hobbylock 2.5 → no adjustment needed on the 644D at every fabric change.
  • Looper threading: assisted on the 644D, manual on the hobbylock 2.5.
  • Maximum overlock width: 5.1 mm on the 644D, 7 mm on the hobbylock 2.5 → wider hems in one pass on the PFAFF.

Which one to choose

Choose Janome MyLock 644D if…

Pick the 644D if it's your first serger and you want fewer manual steps: tension sets itself and looper threading is assisted rather than fully manual. You're limited to 2-, 3- and 4-thread overlock, with no flatlock or rolled hem.

See the Janome MyLock 644D sheet →

Choose PFAFF hobbylock 2.5 if…

Pick the hobbylock 2.5 if you also want flatlock and rolled hem beyond overlocking, with an edge reaching 7 mm versus the 644D's 5.1 mm: ten stitch combinations in total. In exchange you set tension on the dials and thread the loopers by hand, two steps that take more practice when you're starting out.

See the PFAFF hobbylock 2.5 sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.