Janome MyLock 644D vs PFAFF admire air 5000
Technical comparison · Overlockers and sergers
Choosing between these two mid-range sergers comes down to where you want the automation: the PFAFF admire air 5000 threads its loopers with air and widens the overlock stitch up to 7.5 mm but sets tension with manual dials; the Janome MyLock 644D automates tension and sticks to assisted threading and a narrower overlock stitch.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | 649 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 35.1 × 28.4 × 29.9 cm |
| Weight | — | 7.8 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | — | 1 |
| Needles, maximum | — | 2 |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock | 4-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread rolled hem, 2-thread flatlock |
| 2-thread conversion | With accessory | With accessory |
| Differential feed ratio (minimum) | 0.5 | 0.5 |
| Differential feed ratio (maximum) | 2.2 | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 5 mm |
| Overlock width (minimum) | 3.1 mm | 3.3 mm |
| Overlock width (maximum) | 5.1 mm | 7.5 mm |
| Looper threading | Assisted | Air (jet-air) |
| Needle threader | Manual | Built-in |
| Rolled hem conversion | Lever | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | Automatic | Manual dials |
| Maximum speed | — | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Maximum overlock width: 5.1 mm on the 644D, 7.5 mm on the admire air 5000 → wider hems in one pass on the PFAFF, useful for thick fabric or decorative edges.
- Looper threading: assisted on the 644D, jet-air on the PFAFF → quicker setup at every thread change on the PFAFF.
- Thread tension: automatic on the 644D, manual dials on the PFAFF → set by hand whenever fabric changes on the PFAFF.
- Maximum differential feed: 2.2 on the 644D versus 2 on the PFAFF → slightly more margin for gathering stretch fabric on the 644D.
Which one to choose
Choose Janome MyLock 644D if…
Pick the 644D if you'd rather not touch tension every time the fabric changes: it's automatic, and assisted looper threading is still simpler than a fully manual path. The overlock stitch reaches 5.1 mm, enough for finishing standard seams and hems, and the three available stitches cover only 2-, 3- and 4-thread overlock.
Choose PFAFF admire air 5000 if…
Pick the admire air 5000 if you work thick fabric or want wider decorative hems: the overlock stitch reaches 7.5 mm, and jet-air looper threading plus a built-in needle threader cut setup time at every thread change. In exchange you set tension by hand on the dials instead of leaving it automatic.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.