Janome MyLock 644D vs Juki MO-1000
Technical comparison · Overlockers and sergers
Choosing between these two 4-thread sergers comes down to how much threading automation you want and how many techniques you need beyond overlocking: the Juki MO-1000 threads its loopers with air and adds flatlock and rolled hem, while the Janome MyLock 644D sticks to assisted threading and the three basic overlock stitches.
| Parameter | ||
|---|---|---|
| Awards | — | |
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price | 649 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 33 × 28 × 31 cm |
| Weight | — | 9 kg |
| Category specs | ||
| Maximum threads | 4 | — |
| Needles, minimum | — | 1 |
| Needles, maximum | — | 2 |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock | 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem |
| 2-thread conversion | With accessory | Built-in |
| Differential feed ratio (minimum) | 0.5 | 0.7 |
| Differential feed ratio (maximum) | 2.2 | 2 |
| Stitch length (minimum) | 1 mm | — |
| Stitch length (maximum) | 5 mm | — |
| Overlock width (minimum) | 3.1 mm | — |
| Overlock width (maximum) | 5.1 mm | — |
| Looper threading | Assisted | Air (jet-air) |
| Needle threader | Manual | Built-in |
| Rolled hem conversion | Lever | — |
| Retractable upper knife | — | Yes |
| Knife drive | — | Upper thread |
| Adjustable cutting width | Yes | Yes |
| Tension system | Automatic | — |
| Presser foot lift | — | 8 mm |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | — | 1500 spm |
| Waste collector | Yes | Yes |
SewingSpecs Awards
No awards in this tier.
Most capable Advanced
Highest technical score among the 4 sheets in the Overlockers and sergers category (advanced tier): 100/100.
How we assign awards →Best value Advanced
Best balance of technical score and price among the 4 sheets in the Overlockers and sergers category (advanced tier): technical score 100/100. The price used is the sheet's estimated range.
How we assign awards →The differences that matter
- Stitch types: the MO-1000 offers six combinations (including flatlock and rolled hem), the 644D stops at three (overlock only) → anyone who also wants decorative finishing looks at the MO-1000.
- Threading: jet-air loopers and a built-in needle threader on the MO-1000, assisted looper threading and manual needle threading on the 644D → less setup time per thread change on the MO-1000.
- Maximum differential feed: 2.2 on the 644D versus 2 on the MO-1000 → slightly more margin for gathering stretch fabric on the 644D.
- Rated top speed: up to 1500 stitches per minute on the MO-1000 (not stated on the 644D) → better suited to repeated batches of garments.
Which one to choose
Choose Janome MyLock 644D if…
Pick the 644D if all you need is finishing seams and hems with 2-, 3- or 4-thread overlock: looper threading is assisted rather than fully manual, and differential feed reaches 2.2 for lightly gathering stretch fabric. You give up flatlock, rolled hem and a built-in needle threader.
Choose Juki MO-1000 if…
Pick the MO-1000 if you also do rolled hems and flatlock seams beyond overlocking: six stitch combinations cover finishing and decorative work without switching machines. Jet-air looper threading and a built-in needle threader cut setup time every time you change thread or technique.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.