Janome MyLock 644D vs Janome AT 2000D
Technical comparison · Overlockers and sergers
Between these two Janome overlockers from different tiers, the difference that matters most is how much manual threading is involved: the AT 2000D cuts it almost to zero, the 644D leaves more hand work but sets tension on its own.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price | 649 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 34.7 × 28.4 × 29.9 cm |
| Weight | — | 7.9 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Stitch types | 2-thread overlock, 3-thread overlock, 4-thread overlock | — |
| 2-thread conversion | With accessory | Built-in |
| Differential feed ratio (minimum) | 0.5 | 0.5 |
| Differential feed ratio (maximum) | 2.2 | 2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 5 mm |
| Overlock width (minimum) | 3.1 mm | — |
| Overlock width (maximum) | 5.1 mm | — |
| Looper threading | Assisted | Air (jet-air) |
| Needle threader | Manual | Built-in |
| Rolled hem conversion | Lever | Lever |
| Retractable upper knife | — | Yes |
| Adjustable cutting width | Yes | Yes |
| Tension system | Automatic | Manual dials |
| Presser foot lift | — | 5.5 mm |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | — | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Looper threading: assisted on the 644D, air (jet-air) on the AT 2000D → on the AT 2000D a lever does it, the 644D needs more manual work.
- Needle threader: manual on the 644D, built in on the AT 2000D → one less step at every thread break.
- Thread tension: automatic on the 644D, dial-set on the AT 2000D → on the 644D it doesn't need resetting when changing fabric.
- Disengageable upper knife: only on the AT 2000D → allows rolled hems without cutting the fabric.
Which one to choose
Choose Janome MyLock 644D if…
The MyLock 644D sets thread tension automatically: it doesn't need touching with every fabric change, an advantage when switching often between fabric types. Differential feed reaches 2.2, a margin that helps gather slightly or keep stretch fabric flat. In exchange, looper threading is only assisted and the needle is threaded by hand, and a rolled hem without cutting needs an accessory for 2-thread conversion.
Choose Janome AT 2000D if…
The AT 2000D threads the loopers with air (jet-air): press a lever and the thread runs through the hook points on its own, saving time at every colour change or thread break. The needle threader is built in and 2-thread conversion needs no separate accessory. The upper knife disengages for rolled hems without cutting the fabric. Tension, though, is set by hand with dials at every fabric change, and maximum differential feed is slightly lower, 2 against 2.2.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.