HUSQVARNA VIKING AMBER S|100 vs Janome MyLock 644D
Technical comparison · Overlockers and sergers
Two 4-thread sergers with assisted looper threading and 2-thread conversion by accessory. The maximum overlock width differs: 7 mm on the HUSQVARNA VIKING AMBER S|100, 5.1 mm on the Janome MyLock 644D.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | ~450–1000 € | 649 € |
| Universal specs | ||
| Weight | 9 kg | — |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Available stitches | 16 | — |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 3-thread stretch overlock, 2-thread overlock, 2-thread wrapped edge, 2-thread rolled hem, 2-thread flatlock, Chain stitch | 2-thread overlock, 3-thread overlock, 4-thread overlock |
| 2-thread conversion | With accessory | With accessory |
| Differential feed ratio (minimum) | — | 0.5 |
| Differential feed ratio (maximum) | — | 2.2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 5 mm |
| Overlock width (minimum) | — | 3.1 mm |
| Overlock width (maximum) | 7 mm | 5.1 mm |
| Looper threading | Assisted | Assisted |
| Needle threader | — | Manual |
| Rolled hem conversion | Lever | Lever |
| Retractable upper knife | Yes | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | — | Automatic |
| Adjustable presser foot pressure | Yes | — |
| Maximum speed | 1300 spm | — |
| Waste collector | Yes | Yes |
The differences that matter
- Maximum overlock width: 7 mm vs 5.1 mm → the HUSQVARNA covers wider edges; the Janome stops at 5.1 mm.
Manufacturer-declared values.
Which one to choose
Choose HUSQVARNA VIKING AMBER S|100 if…
You want an overlock up to 7 mm and a wide repertoire: the spec sheet declares 16 stitches, including flatlock, 3-thread stretch overlock and chain stitch. It runs at 1300 stitches per minute, has adjustable presser foot pressure and weighs 9 kg.
Choose Janome MyLock 644D if…
You work with a narrower overlock, from 3.1 to 5.1 mm, and want automatic tension; the differential feed goes from 0.5 to 2.2. The trade-off: the overlock does not go beyond 5.1 mm.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.