Elna eXtend 864air vs W6 Wertarbeit W6 Overlock N 656D Freiarm

Technical comparison · Overlockers and sergers

In brief

Two four-thread overlockers stating the same speed and the same 5 mm maximum stitch length (manufacturer's stated values). What changes is how much work is left to the hands: the Elna threads its loopers by air and has a built-in needle threader, the W6 has assisted looper threading and a manual needle.

Parameter
Identity
Use tier F3 — Advanced F2 — Intermediate
Price
Price ~1000–2200 € 299 €
Universal specs
Dimensions (W×D×H) 34.7 × 28.4 × 29.9 cm —
Weight 7.9 kg 7.35 kg
Power — 90 W
Category specs
Maximum threads 4 4
Needles, minimum 1 —
Needles, maximum 2 2
Available stitches 13 16
Stitch types 4-thread overlock, 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread flatlock, 2-thread rolled hem —
2-thread conversion Built-in —
Differential feed ratio (minimum) 0.5 —
Differential feed ratio (maximum) 2 —
Stitch length (minimum) 1 mm —
Stitch length (maximum) 5 mm 5 mm
Overlock width (minimum) 5.5 mm —
Overlock width (maximum) 7.5 mm 7 mm
Looper threading Air (jet-air) Assisted
Needle threader Built-in Manual
Rolled hem conversion Lever —
Adjustable cutting width Yes Yes
Tension system Manual dials —
Free arm — Yes
Space to the right of the needle — 45 mm
Presser foot lift 5.5 mm —
Adjustable presser foot pressure Yes Yes
Maximum speed 1300 spm 1300 spm
Waste collector Yes —

The differences that matter

  • Threading: air-threaded loopers and built-in needle threader on the Elna, assisted looper threading and manual needle on the W6 → on the W6 the needle is always threaded by hand.
  • 2-thread conversion and rolled hem: built in and by lever on the Elna → you change technique without fitting accessories.

Which one to choose

Choose Elna eXtend 864air if…

You move within the same job from overlock to rolled hem to 2-thread work: the 2-thread conversion is built in and the rolled hem is engaged by a lever. The overlock reaches 7.5 mm and the machine weighs 7.9 kg, 550 g more than the W6.

See the Elna eXtend 864air sheet →

Choose W6 Wertarbeit W6 Overlock N 656D Freiarm if…

You need the free arm for tubular work such as cuffs and sleeves. The list counts 16 stitches against 13, the overlock stops at 7 mm and the needle is threaded by hand, with assisted looper threading.

See the W6 Wertarbeit W6 Overlock N 656D Freiarm sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.