Elna eXtend 864air vs Janome MyLock 644D
Technical comparison · Overlockers and sergers
Anyone looking at a mid-to-upper-range serger decides mainly on looper threading: air-jet on the 864air, assisted on the 644D. That difference affects the minutes lost at every thread change or break during a job.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price | ~1000–2200 € | 649 € |
| Universal specs | ||
| Dimensions (W×D×H) | 34.7 × 28.4 × 29.9 cm | — |
| Weight | 7.9 kg | — |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | 1 | — |
| Needles, maximum | 2 | — |
| Available stitches | 13 | — |
| Stitch types | 4-thread overlock, 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread flatlock, 2-thread rolled hem | 2-thread overlock, 3-thread overlock, 4-thread overlock |
| 2-thread conversion | Built-in | With accessory |
| Differential feed ratio (minimum) | 0.5 | 0.5 |
| Differential feed ratio (maximum) | 2 | 2.2 |
| Stitch length (minimum) | 1 mm | 1 mm |
| Stitch length (maximum) | 5 mm | 5 mm |
| Overlock width (minimum) | 5.5 mm | 3.1 mm |
| Overlock width (maximum) | 7.5 mm | 5.1 mm |
| Looper threading | Air (jet-air) | Assisted |
| Needle threader | Built-in | Manual |
| Rolled hem conversion | Lever | Lever |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | Automatic |
| Presser foot lift | 5.5 mm | — |
| Adjustable presser foot pressure | Yes | — |
| Maximum speed | 1300 spm | — |
| Waste collector | Yes | Yes |
The differences that matter
- Maximum overlock width: 7.5 mm vs 5.1 mm → on the 864air the stitch covers a wider edge on thick fabrics.
- Looper threading: air-jet on the 864air, assisted on the 644D → on the 864air thread passes through the loopers at the press of a button, no hand-threading.
- Thread tension: manual on the 864air, automatic on the 644D → the 644D doesn't need the dials adjusted at every fabric change.
- Maximum differential feed: 2 vs 2.2 → the 644D has a bit more margin for gathering thin stretch fabrics.
Which one to choose
Choose Elna eXtend 864air if…
Air-jet looper threading skips pulling thread through the loopers by hand: press a button and a jet of air pushes it along the path. The maximum overlock width of 7.5 mm covers wider edges on thick or fraying fabrics, where the 644D's 5.1 mm stitch would cover less margin.
Choose Janome MyLock 644D if…
Thread tension is automatic, so it doesn't need adjusting the dials at every fabric change the way the 864air does. Differential feed reaches 2.2 versus 2, a bit more margin for gathering thin stretch fabrics.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.