Brother 1034D vs Janome MyLock 644D
Technical comparison · Overlockers and sergers
Two four-thread mid-range overlockers. What separates them is the width of the seam: 5 to 7 mm on the Brother, 3.1 to 5.1 mm on the Janome (manufacturer-stated values).
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price | ~200–450 € | 649 € |
| Universal specs | ||
| Voltage | 110 V | — |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, maximum | 2 | — |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread rolled hem | 2-thread overlock, 3-thread overlock, 4-thread overlock |
| 2-thread conversion | None | With accessory |
| Differential feed ratio (minimum) | — | 0.5 |
| Differential feed ratio (maximum) | — | 2.2 |
| Stitch length (minimum) | — | 1 mm |
| Stitch length (maximum) | — | 5 mm |
| Overlock width (minimum) | 5 mm | 3.1 mm |
| Overlock width (maximum) | 7 mm | 5.1 mm |
| Looper threading | — | Assisted |
| Needle threader | — | Manual |
| Rolled hem conversion | — | Lever |
| Retractable upper knife | Yes | — |
| Knife drive | Lower | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | Automatic |
| Free arm | Yes | — |
| Adjustable presser foot pressure | Yes | — |
| Maximum speed | 1300 spm | — |
| Waste collector | Yes | Yes |
The differences that matter
- Overlock width: 5–7 mm vs 3.1–5.1 mm → wide seam on the Brother, narrower on the Janome.
- 2-thread overlock: no conversion on the Brother, with accessory on the Janome → only the Janome sews it.
- Tension: manual dials vs automatic → on the Brother you set it yourself.
Which one to choose
Choose Brother 1034D if…
You finish edges that call for a wide overlock, up to 7 mm, and you need the free arm and adjustable presser foot pressure. The rolled hem is 3-thread. You give up the 2-thread overlock, since there is no conversion, and tension is set with dials only.
Choose Janome MyLock 644D if…
You work narrow edges, from 3.1 mm, or you want the 2-thread overlock, available with the accessory. Tension is automatic, looper threading is assisted and the rolled hem is switched on with a lever. The overlock does not go beyond 5.1 mm.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.