BERNINA L 460 vs W6 Wertarbeit W6 Overlock N 656D Freiarm
Technical comparison · Overlockers and sergers
Two 4-thread sergers. The choice comes down to overlock width: up to 9 mm on the BERNINA L 460, up to 7 mm on the W6 Wertarbeit W6 Overlock N 656D Freiarm.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price | ~1000–2200 € | 299 € |
| Universal specs | ||
| Dimensions (W×D×H) | 32 × 30.5 × 29.5 cm | — |
| Weight | 9.8 kg | 7.35 kg |
| Power | — | 90 W |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | 1 | — |
| Needles, maximum | 2 | 2 |
| Available stitches | 16 | 16 |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge, 2-thread overlock | — |
| Differential feed ratio (minimum) | 0.7 | — |
| Differential feed ratio (maximum) | 2 | — |
| Stitch length (minimum) | 0.8 mm | — |
| Stitch length (maximum) | 4 mm | 5 mm |
| Overlock width (minimum) | 3 mm | — |
| Overlock width (maximum) | 9 mm | 7 mm |
| Looper threading | Manual | Assisted |
| Needle threader | Manual | Manual |
| Rolled hem conversion | Lever | — |
| Knife drive | Upper thread | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | — |
| Free arm | — | Yes |
| Space to the right of the needle | — | 45 mm |
| Knee lifter | Yes | — |
| Adjustable presser foot pressure | Yes | Yes |
| Maximum speed | 1500 spm | 1300 spm |
The differences that matter
- Maximum overlock width: 9 mm vs 7 mm → the BERNINA covers wider edges; the W6 stops at 7 mm.
- Looper threading: manual vs assisted → on the W6 a thread change takes less hand work; on the BERNINA the loopers are threaded by hand.
- Maximum stitch length: 4 mm vs 5 mm → the W6 stretches the stitch 1 mm beyond the BERNINA.
Manufacturer-declared values.
Which one to choose
Choose BERNINA L 460 if…
You sew in batches and want an overlock up to 9 mm wide at 1500 stitches per minute, with a knee lift that keeps both hands on the fabric. The trade-offs: the loopers are threaded by hand at every thread change, the stitch tops out at 4 mm and the machine weighs 9.8 kg.
Choose W6 Wertarbeit W6 Overlock N 656D Freiarm if…
You change thread often and want assisted looper threading; you need a free arm, with 45 mm to the right of the needle, and a stitch up to 5 mm. It weighs 7.35 kg. The trade-off: the overlock stops at 7 mm and the speed at 1300 stitches per minute.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.