BERNINA L 460 vs Janome MyLock 644D
Technical comparison · Overlockers and sergers
Two 4-thread sergers: what decides it is how much work you ask of the machine. The BERNINA L 460 also does flatlock, rolled hem and wrapped edge, but tension and threading are manual; the Janome MyLock 644D does overlocking and automates tension and looper threading (the loopers are the two hooks that carry thread under the fabric). Values quoted are declared by the manufacturer.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price | ~1000–2200 € | 649 € |
| Universal specs | ||
| Dimensions (W×D×H) | 32 × 30.5 × 29.5 cm | — |
| Weight | 9.8 kg | — |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, minimum | 1 | — |
| Needles, maximum | 2 | — |
| Available stitches | 16 | — |
| Stitch types | 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge, 2-thread overlock | 2-thread overlock, 3-thread overlock, 4-thread overlock |
| 2-thread conversion | — | With accessory |
| Differential feed ratio (minimum) | 0.7 | 0.5 |
| Differential feed ratio (maximum) | 2 | 2.2 |
| Stitch length (minimum) | 0.8 mm | 1 mm |
| Stitch length (maximum) | 4 mm | 5 mm |
| Overlock width (minimum) | 3 mm | 3.1 mm |
| Overlock width (maximum) | 9 mm | 5.1 mm |
| Looper threading | Manual | Assisted |
| Needle threader | Manual | Manual |
| Rolled hem conversion | Lever | Lever |
| Knife drive | Upper thread | — |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | Automatic |
| Knee lifter | Yes | — |
| Adjustable presser foot pressure | Yes | — |
| Maximum speed | 1500 spm | — |
| Waste collector | — | Yes |
The differences that matter
- Overlock width: up to 9 mm against 5.1 mm → the L 460 finishes wider seam allowances in one pass.
- Stitch types: flatlock, rolled hem and wrapped edge on the L 460, only 2-, 3- and 4-thread overlock on the 644D → flat seams and rolled hems only with the L 460.
- Tension and threading: manual dials and loopers on the L 460, automatic tension and assisted threading on the 644D → at every thread change the 644D needs less adjusting.
- Working comfort: knee lift on the L 460, trim catcher on the 644D → hands free on the fabric on one, a clear table on the other.
Which one to choose
Choose BERNINA L 460 if…
You sew knits and sportswear and want flat seams, rolled hems on light fabrics or wrapped edges, on top of standard overlocking. You also get a knee lift and adjustable presser foot pressure. You accept setting the tension dials by hand and threading the loopers at every thread change.
Choose Janome MyLock 644D if…
You finish edges and seams on a mix of garments and change thread color often: tension sets itself and assisted looper threading cuts the work at each change. The trim catcher keeps the table clear. You give up flatlock and wrapped edge, and an overlock wider than 5.1 mm; 2-thread needs an accessory.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.