bernette 64 AIRLOCK vs Juki MO-1000

Technical comparison · Overlockers and sergers

In brief

Two overlockers with air threading for the loopers. The Juki MO-1000 lists a built-in needle threader and 1500 stitches per minute (manufacturer values), the bernette 64 AIRLOCK ten stitch types and a free arm with 130 mm to the right of the needle.

Parameter
Awards —
Identity
Use tier F2 — Intermediate F3 — Advanced
Price
Price ~1000–2200 € ~1000–2200 €
Universal specs
Dimensions (W×D×H) — 33 × 28 × 31 cm
Weight — 9 kg
Category specs
Needle system ELx705 —
Needles, minimum — 1
Needles, maximum — 2
Available stitches 16 —
Stitch types 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem
2-thread conversion — Built-in
Differential feed ratio (minimum) — 0.7
Differential feed ratio (maximum) — 2
Overlock width (minimum) 3 mm —
Overlock width (maximum) 7 mm —
Looper threading Air (jet-air) Air (jet-air)
Needle threader Manual Built-in
Retractable upper knife — Yes
Knife drive — Upper thread
Adjustable cutting width — Yes
Free arm Yes —
Space to the right of the needle 130 mm —
Presser foot lift — 8 mm
Knee lifter Yes —
Adjustable presser foot pressure — Yes
Maximum speed 1300 spm 1500 spm
Waste collector Yes Yes

SewingSpecs Awards

bernette 64 AIRLOCK

No awards in this tier.

Juki MO-1000

Most capable Advanced

Highest technical score among the 4 sheets in the Overlockers and sergers category (advanced tier): 100/100.

How we assign awards →

Best value Advanced

Best balance of technical score and price among the 4 sheets in the Overlockers and sergers category (advanced tier): technical score 100/100. The price used is the sheet's estimated range.

How we assign awards →

The differences that matter

  • Stitch types: ten on the bernette, six on the Juki → stretch overlock, 2-thread flatlock, 2-thread rolled hem and wrapped edge appear only on the bernette.
  • Needle threader: manual on the bernette, built in on the Juki → on the Juki threading the needle takes no hand work.
  • Top speed: 1300 against 1500 stitches per minute → 200 more stitches a minute on the Juki.

Which one to choose

Choose bernette 64 AIRLOCK if…

On Monday morning you need to alternate 2- and 3-thread rolled hems, 2- and 3-thread flatlock, stretch overlock and wrapped edge: there are ten stitch types, against six on the Juki sheet. You get 130 mm to the right of the needle, a free arm and a knee lift. The trade-off: the needle is threaded by hand and top speed is 1300 stitches per minute.

See the bernette 64 AIRLOCK sheet →

Choose Juki MO-1000 if…

On Monday morning you have long seams to overlock and want precise adjustment: 1500 stitches per minute, a built-in needle threader, differential feed from 0.7 to 2, a disengageable upper knife, adjustable cutting width and presser foot pressure. The trade-off: the sheet lists six stitch types, namely 2-, 3- and 4-thread overlock, narrow 3-thread, 3-thread flatlock and 3-thread rolled hem.

See the Juki MO-1000 sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.